How to Drill a Screw into a Wall Like a Pro

We research in-depth and provide unbiased reviews and recommendations on the best products. We strive to give you the most accurate information. If you buy something through our links, we may earn a commission.

If you’re like me, you probably think of how to drill a screw into a wall as something that’s best left to the pros. But did you know that with the right tools and technique, anyone can do it like a pro? In this blog post, I’ll show you how to drill a screw into a wall like a pro – no experience required! So whether you’re looking to hang a picture or mount some shelves, read on for tips and tricks that will make the job easy peasy.

What are the tools that you’ll need?

To successfully drill a screw into a wall, you will need the following items:

  • A drill bit. Choose a drill bit that is the correct size for your screw,
  • A drill. If you don’t already have one, you can usually find a good quality drill at your local hardware store.
  • A screw. Make sure to select a screw that is appropriate for the material of your wall.
  • A level. This will help ensure that your screw is drilled in straight.
  • A tape measure. This will come in handy for measuring the spacing between your screws.
  • A wall anchor. If you’re drilling into plaster or drywall, you’ll need to use a wall anchor to secure your screw.
red and silver hand tool

How to drill a screw into a wall

Now that you have all of the necessary tools, it’s time to get to work! Here are the steps you need to follow to drill a screw into a wall like a pro:

  1. Start by measuring the distance between the screws that you want to place on your wall.
  2. Using a level, mark the spot on the wall where you want to drill your first screw.
  3. Insert your drill bit into the chuck of your drill and tighten it until it’s snug.
  4. Place the tip of the drill bit on the mark that you made on the wall, and make sure that the drill is perpendicular to the surface.
  5. Apply pressure to the drill and start drilling slowly.
  6. As you’re drilling, keep the drill bit perpendicular to the wall to avoid damage.
  7. Once the drill bit has penetrated the surface of the wall, remove it from the chuck and insert your screw.
  8. Start screwing the screw into the wall, and continue until it’s tight.
  9. Repeat steps 2-8 for each screw that you want to place on the wall.
  10. Once all of the screws are in place, remove the level from the wall.

Other ways to use screws

Screws are one of the most versatile and commonly used fasteners. They can be used for a variety of applications, from attaching brackets to mounting curtain rods. Here are just a few ways that screws can be used around the home:

  • To secure door hinges, use screws that are at least three inches long. For lighter-weight doors, such as those made from hollow-core fiberboard, you can use one-inch screws.
  • If you need to hang a heavy mirror or picture frame, use screws that are at least two inches longer than the thickness of the item you’re hanging. That way, the screws will be anchored deep enough into the wall to provide adequate support.
  • When mounting shelves or cabinets, it’s important to use the correct size screws. If the screw is too short, it won’t provide enough holding power. If it’s too long, it could come out the other side of the wood and damage your wall. To avoid this problem, always use screws that are 1/4 inch shorter than the thickness of the wood you’re attaching them to.

Screwdriver types

There are many different types of screwdrivers, each designed for a specific screw type. These are:

  • The flathead is used for flat-head screws.
  • The Phillips screwdriver is used for Phillips screws, which have a cross-shaped head.
  • The Torx screwdrivers, which are used for Torx screws
  • The hex screwdrivers, which are used for hex screws.
  • There are specialized screwdrivers for electronics, such as tri-point screwdrivers.

When selecting a screwdriver, it is important to choose one that is the right size and shape for the screw you are working with. Otherwise, you run the risk of stripping the screw or damaging the surrounding area.

Drill bits for wood screws

When it comes to screwing into wood, you need the right type of drill bit to ensure a tight fit. Here is a list of the most common types of drill bits for wood screws:

  • Brad-point bits. These bits have a sharp point that helps to keep the bit from wandering when drilling. They are ideal for use with smaller screws.
  • Twist bits. These bits have a tapered point that allows them to bite into the wood more easily. They are perfect for use with larger screws.
  • Forstner bits. These bits have a flat bottom that helps to prevent the bit from slipping when drilling. They are ideal for use with large screws or for drilling through thick pieces of wood.
Read More:   How to Apply Polyurethane to Flat Surfaces

Countersinking the pilot hole

If you are using a countersink bit, you will need to countersink the pilot hole before you start drilling. This will create a shallow hole in the surface of the wall that will allow the screw to sit flush with the wall. To do this, hold the drill at a 90-degree angle to the wall and slowly drill into the surface.

Once you have reached the desired depth, pull the trigger and release it to stop the drill. Then, withdraw the drill bit from the hole. You should now have a small countersink in the wall.

How to remove a screw from a wall

When you need to remove a screw from a wall, there are a few things you can do.

  • If you are using a drill, first make sure that the bit is the correct size for the screw. You don’t want it to be too big or too small. Start by drilling a hole in the wall next to the screw. The hole should be big enough for the drill bit to fit through. Then, insert the drill bit into the hole and start drilling.
  • As you drill, the screw will start to loosen and come out of the wall. If it becomes stuck, try using a different drill bit or increasing the speed of the drill.
  • Once the screw is removed, you can patch up the hole with some putty or plaster.
  • If the screw is loose, you can try to remove it by hand. Start by turning it to the left. If it doesn’t budge, try turning it to the right. If it still doesn’t budge, you can try using a pair of pliers.
  • Once the screw is removed, you can patch up the hole with some putty or plaster.

Different types of screws and when to use it

It’s always handy to have a few different types of screws around the house for quick repairs. But with all the different sizes, head shapes, and tread patterns available, it can be hard to know which one to use for a particular project. Here’s a quick guide to some of the most common types of screws so you can choose the right one for the job.

Wood screws

Wood screws are ideal for attaching two pieces of wood. They have sharp threads that bite into the wood, making them less likely to slip out over time. The heads are usually flat or countersunk, so they can lie flush with the surface of the wood. Wood screws come in a variety of lengths and diameters to accommodate different thicknesses of wood. 

Machine screws

Machine screws are threaded fasteners that are often used with nuts or drilled and tapped (threaded) holes. They come in a range of diameters and lengths, and their charge heads come in several different head styles. Machine screws are generally made from low-carbon steel, but they can also be found in stainless steel or brass. 

Type A

Type A is the most common type of machine screw and is used in approximately 80% of applications. Types B, AB, and TAB are also available and are used depending on the application.

Drywall screws

Drywall screws are specialized screws that are designed for use with drywall. They have sharp points and coarse threads that bite into the drywall and hold it in place. Drywall screws come in a variety of lengths to accommodate different thicknesses of drywall. The most common length is 1-1/4 inches.

How to know if a screw is stripped

If a screwdriver won’t fit into the head of the screw or if it’s difficult to turn, the screw may be stripped. You can also try to wiggle the screw back and forth to see if it moves easily. If it doesn’t, the screw may be stripped.

If you think the screw is stripped, there are a few ways to try to remove it.

  • Try using a different size screwdriver or drill bit. If that doesn’t work, you can try using a pair of pliers to grip the head of the screw and turn it.
  • Another way to remove a stripped screw is to use a screw extractor. This is a tool that you can insert into the head of the screw and then turn in the opposite direction to remove it.
  • If you don’t have a screw extractor, you can try using a drill to make a hole in the head of the screw. Then, use a nail or a piece of wire to pull the screw out.

How to avoid stripping screws

The best way to avoid stripping screws is to do the following:

  • Use the right tool for the job. Make sure you have the right size screwdriver or drill bit and that it’s the correct type for the screw you’re using. You should also make sure that the drill bit is sharp and in good condition.
  • If you are using a power drill, be careful not to apply too much pressure. Let the drill do the work and go slowly so you don’t strip the screw.
  • It’s also a good idea to countersink the screw slightly so that the head is flush with the surface of the wood. This will help to prevent the screw from stripping when you’re driving it in.

Different types of wall materials

Different types of wall materials come with different benefits.

  • Wood, for example, is a natural material that can be finished in a variety of ways to achieve different looks. It’s also easy to screw into and remove, making it a good choice for areas where you may need to access the wall cavity, such as for electrical wiring.
  • Drywall is another popular material, and it’s relatively inexpensive and easy to install. However, it can be damaged easily and is not as durable as some other materials. 
  • Brick is a more durable option, but it can be expensive and difficult to install.
  • Stone is also durable, but it’s even more expensive than brick. If you’re looking for an eco-friendly option, consider using recycled materials like tires or bottles.
Read More:   How to Touch Up Car Paint

How to drill into different types of wall materials

There are a few things you need to keep in mind when drilling a screw into a wall. The type of wall material you are drilling into will affect the drill bit you use, as well as the size of screw you should use.

How to drill into drywall.

Drilling into drywall is a fairly simple process, but there are a few things to keep in mind to ensure a successful result.

  1. Make sure that the screw you are using is the proper size and type for the material you are drilling into.
  2. Mark the spot where you will be drilling with a pencil or marker to ensure that you drill in the correct location.
  3. Use a drill bit that is slightly smaller than the screw so that it can create a pilot hole.
  4. Insert the screw into the pilot hole and tighten it until it is snug.
  5. Remove the drill bit and continue to screw the screw into the drywall until it is flush with the surface.
  6. Sand down any rough edges around the screw to create a smooth finish. With these steps in mind, drilling into drywall will be a breeze.

How to drill into brick

With a little care and attention, you can successfully drill into brick and create a secure attachment. Here are some tips for you:

  • Use the right screw when attaching something to a brick. Traditional screws will not grip the brick securely and will eventually come loose. The best screw to use is a screw with an anchor.
  • Drill a pilot hole into the brick using a masonry bit.
  • Insert the screw into the hole and tighten it until the anchor is flush with the surface of the brick. Be careful not to over-tighten the screw, as this can cause the anchor to break loose from the brick.

How to drill into plaster

  • Drilling into a plaster is different than drilling into other materials like wood or metal. Plaster is softer and more brittle, so it requires a different approach. Here are a few tips to help you get started:
  • Use a smaller drill bit than you would for other materials.
  • Start with a pilot hole. This will help to prevent the plaster from cracking.
  • Use gentle pressure when drilling. Don’t force the drill bit, or you may damage the plaster.
  • Be patient. Drilling into plaster takes a little time and effort, but with these tips, you’ll be successful in no time.

How to drill into concrete

If you need to screw into concrete, there’s no need to call a professional or rent a special drill. With the right tools and a little bit of know-how, drilling into concrete is a relatively straightforward task. Here’s what you need to do:

  • Gather your supplies. You’ll need a screw, a drill bit designed for concrete, and a hammer drill. The screw should be slightly longer than the thickness of the material you’re drilling into. For example, if you’re drilling into a 1-inch thick piece of concrete, use a 2-inch screw.
  • Mark the spot where you want to drill. Use a pencil or chalk to make a small dot on the concrete. This will help you keep the drill bit in place as you start drilling.
  • Now it’s time to start drilling. Put the tip of the drill bit on the mark, then press down and start spinning the drill. Apply firm pressure as you drill; if the drillbit starts to wander off course, simply stop and reposition it on the mark before continuing. As you drill, keep an eye on the progress of the hole; when it’s about halfway through the concrete, stop and clear out any loose debris

How to drill into tile

Drilling into tile can seem like a daunting task, but with the right tools and techniques, it’s quite easy.

  1. The first thing you’ll need is a screw that’s specifically designed for drilling into the tile. These screws have a sharp tip that helps them to penetrate the tile surface, and they also have a wide head that helps to prevent the screw from slipping.
  2. Mark the spot where you want to drill. Use a pencil or pen to make a small dot on the tile, and then use a ruler or measuring tape to make sure that the dot is in the center of the hole you want to drill.
  3. Position the drill bit on the surface of the tile and then apply pressure as you turn on the drill. Start with a slow speed and then increase the speed as you continue drilling.
  4. As you drill, keep an eye on the screw to make sure that it’s staying in place. If it starts to slip, simply apply more pressure. Once you’ve drilled through the tile, remove the screw and then screw it into place.

How to avoid damaging walls when drilling

When it comes to hanging pictures or shelves, many people turn to drills to make the job easier. However, if you’re not careful, it’s easy to damage your walls when drilling. Screws are the best way to secure something to a wall without damaging it, but if you must use a drill, there are a few things you can do to minimize the risk of damage.

  • Make sure you’re using the correct type of bit for your drill – using the wrong type of bit can cause the drill to slip and damage the wall.
  • Avoid using too much pressure when drilling – this can also cause the drill to slip and damage the wall.
  • Always use a level when drilling – this will help to ensure that your screw is going into the wall straight, which will minimize the risk of damage.

Where to drill into a wall

Before drilling into a wall, you need to:

  • Find the studs in the wall. You can do this by using a stud finder or by knocking on the wall and listening for a hollow sound. Once you have found the studs, mark them with a pencil so that you will know where to drill.
  • Drill a pilot hole into the wall. Start by drilling a small pilot hole into the wall. This will make it easier to insert the screw into the wall later on. Make sure that the drill bit is slightly smaller than the diameter of the screw.
  • Choose the right type of screw. There are different types of screws that you can use for this project. The most common type is the drywall screw. These screws are designed for use with drywall and will not damage the wall. Another option is a toggle bolt, which is ideal for heavier objects.
  • Insert the screw into the pilot hole. Once you have chosen the right screw, insert it into the pilot hole that you drilled earlier. Slowly screw it into the wall until it is tight. Be careful not to over-tighten the screw, as this could damage the wall.
Read More:   How to Remove Wallpaper From Drywall

What to do if there are no studs in the wall?

If you are drilling into a wall and there are no studs, you will need to use a different type of screw. A toggle bolt is a good option, as it has a small metal bar that flips up once the screw is inserted into the wall. This anchors the screw in place and prevents it from coming loose. You can also use wall anchors, which are plastic or metal plugs that expand once inserted into the hole. This provides a more secure hold but can be difficult to remove if you need to make any adjustments.

If you’re looking for a more permanent solution, you can install screw eyes into the wall. These work best in plaster walls, as they provide a more secure grip. To install, simply screw the eye into the wall using a drill. Make sure that the screw is flush with the surface of the wall so that it doesn’t protrude and cause injury.

How to know if the screw is inserted correctly

If you are unsure if the screw is inserted correctly, use a level to check. Place the level on top of the screw head and make sure it is parallel to the wall. If it is not, remove the screw and try again.

Another way to tell if the screw is inserted correctly is by looking at the surrounding area. The wall should be smooth and even around the screw. If there are any cracks or unevenness, this indicates that the screw is not inserted correctly.

If you still can’t tell if the screw is inserted correctly, try tugging on it gently. It should be tight in the wall but not so tight that you can’t remove it.

What to do if the screw will not go into the wall

If the screw will not go into the wall, it may be because the hole you drilled is too large. Try using a smaller drill bit to make a pilot hole. If the screw still will not go in, try applying some wood glue to the screw and then drilling into the wall again. The wood glue will help to hold the screw in place.

Another possibility is that the wall is made of a material that is too hard for the drill bit you are using. Try using a different type of drill bit or a power drill with a higher setting. If none of these solutions work, then you may need to use a different type of screw.

how to drill a screw into a wall

Conclusion

In this article, you have learned about the different types of screws that can be used to drill into a wall. You have also learned how to find the studs in the wall and how to avoid damaging your walls when drilling. If you are having trouble inserting the screw into the wall, try using a smaller drill bit or applying wood glue to the screw. You can also use a toggle bolt or wall anchor for a more secure hold. Finally, use a level to check if the screw is inserted correctly.

FAQs

How do I drill a screw into a wall?

First, find a stud in the wall using a stud finder. Then, mark the spot where you want to drill the screw. Drill a hole at the marked spot, using a drill bit that is slightly smaller than the screw. Insert the screw into the hole and tighten it with a screwdriver.

What is the best way to drill a screw into a wall?

The best way to drill a screw into a wall is by using a drill bit that is slightly smaller than the screw. This will create a tight fit so the screw doesn’t come loose over time.

How do I avoid damaging the wall when drilling?

To avoid damaging the wall, use a drill bit that is slightly smaller than the screw. Drill slowly and carefully at first to avoid cracking or chipping the paint or drywall.

Is it better to use screws or nails to hang things on the wall?

In general, screws are better than nails for hanging things on the wall because they are more secure and less likely to pop out over time.

Why trust Handyman.Guide?

s written by Itamar Ben-Dor, who has 25 years of experience in renovations, carpentry, locks, creation, landscaping, painting, furniture construction, and furniture renovation, works with concrete, plumbing, door repair, and more.

Itamar Ben-Dor has been in the home improvement business for over 25 years. Itamar Ben-Dor is a jack of all trades. He's worked in the renovation field for years, doing everything from locksmithing to carpentry. He's a small repairs specialist. But his true passion lies in furniture construction and renovation - he loves seeing old pieces come back to life with some new woodwork or a fresh coat of paint.

He has taken courses on many topics in these fields at professional colleges in Israel. Over the years, Itamar has also become quite skilled in gardening, carpentry, and renovations. He's worked on projects of all sizes, from massive renovations to small repairs. No job is too big or too small for him!


Disclosure: handyman.guide participates in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for publishers to earn fees by linking to Amazon.com and affiliated sites.

HandyMan.Guide
Logo