Can Angle Grinders Cut Wood?

We research in-depth and provide unbiased reviews and recommendations on the best products. We strive to give you the most accurate information. If you buy something through our links, we may earn a commission.

An angle grinder is a kind of power tool, which is used for working with metals and other solid materials like wood. Sometimes you may wonder if an angle grinder can cut through wood as well.

The answer to this question is: Yes, it can. An angle grinder can cut wood as long as the material you are using has at least one end that’s made of metal (to hold on to).

If there were no handle on your piece of wood and you still wanted to cut it with an angle grinder, then that wouldn’t be possible; otherwise, it would be very unsafe! Most concrete cutting discs that can be used on an angle grinder won’t work on wood since they’re designed specifically for preparing surfaces before concrete is poured.

Angle grinders work especially well with hard materials like stone. The angle grinder blades are equipped to handle these types of materials but aren’t really designed for working on wood.

So the short answer to the question ‘can angle grinders cut wood?’ is yes; they can cut through it as long as they have a piece of metal attached to them and you’re using the right disc for the job (so you don’t ruin your blade).

Can I Use a Metal Cutting Disc on Wood?

Metal cutting discs are designed to cut through metal, so you can’t use them on wood. However, there are some high-speed saw blades that will work on soft woods, but only if the teeth aren’t sharp. You need dull or at least round ground edges in order for it to be safe.

If the teeth of your blade are sharp, then you’re just asking for trouble when trying to use it on any type of wood because not only is the blade likely to clog up with debris very quickly, but more importantly you risk having flying debris come at you since they’ll be spinning around much faster than normal as soon as they hit a piece of solid material such as wood and become stuck. Wood has far less surface area than a metal cutting wheel so it becomes jammed much more easily, and this happens faster.

Also if the blade is too thin, it won’t have enough mass to cut through wood properly even with dull teeth because it will warp from the intense heat generated by friction as soon as it starts to become stuck in the wood. So you can use a high-speed saw blade on soft woods only if the teeth are not sharp and if the blade is reasonably thick. It’s just not worth risking serious injury for such a trivial task!

As you can see from these two questions, “can angle grinders cut wood,” and “can I use a metal cutting disc on wood,” both have very similar answers.

The main difference between the two is that an angle grinder can cut through wood as long as it has a piece of metal on the end (the material doesn’t necessarily need to be attached if it’s thick enough, although this isn’t recommended) and you’re using the right disc for the job.

An angle grinder blade won’t work very well with soft woods like pine because they clog up easily, but it will work perfectly fine with hardwoods like oak because wood cutting discs are designed specifically for these types of materials.

Read More:   The Best Weed Killer for 2022

The risk of injury is high when trying to use a saw blade on any type of wood because not only does it have just one handle, but most importantly sharp teeth that could bounce back at you since they’ll be spinning much faster when they hit a piece of solid material such as wood. Again, it’s just not worth the risk for such trivial tasks!

WANThat’s the Safest Alternative For Cutting Wood Quickly?

There are many different types of professionals that can cut wood for you, such as framers, carpenters and cabinet makers. They all require various tools to do their job, but one tool that is absolutely essential for them (and anyone else who wants to cut wood) is a portable circular saw.

The beautiful thing about having a circular saw sitting around is that you don’t need an extra handle like with angle grinders or metal cutting saw blades; instead, it sits on top of the wood and moves along with it as the blade cuts through the material at whatever depth you set it at (you can also tilt it towards an angle if necessary). It’s one of those tools that does so much more than you’d think just by looking at it because pretty much all you need for this to work is the circular saw (with or without a blade) and whatever type of wood that you want to cut.

You could even use an old car tyre instead of the circular saw, but it wouldn’t be as safe; although if you’re cutting something like plywood then the risk of injury would be extremely low because there’s no way for splinters to fly back at you like with regular wood sawing methods. You’d just have to hold on tight!

Regardless, using either method should eventually wear out your arm muscles over time after prolonged periods, so just do what makes sense for you in this regard.

How to Use Cut Wood with an Angle Grinder?

As mentioned in the previous answer, don’t use a saw blade with an angle grinder because it has just one handle and sharp teeth that can bounce back at you when they hit something solid. Instead, use a metal cutting disc that is designed specifically for wood or any other applications where you may need to cut through soft material quickly.

In terms of how deep you should set the disc every time, the best thing to do is watch what others are doing since they’ll have more experience than you as far as learning from their mistakes as well as knowing the best way to approach each job. In general though, try holding down whatever type of wood you’re going through with your foot so it doesn’t move around while cutting, and adjust the angle grinder to 45 degrees (in addition to adding downward pressure on it with your hand).

When you get the hang of how much to adjust the angle grinder, you should gradually decrease the angle each time you go around (and do multiple times) because there’s not really a specified number that would be perfect for everyone; if this is confusing then just keep practicing until it becomes second nature. Or you could always ask another seasoned professional for some guidance if that makes more sense!

What Type Of Wood Can I Cut With An Angle Grinder?

That’s totally up to you! As long as you have an appropriate metal cutting disc, there shouldn’t be any limitations in terms of what type of wood it can cut through because pretty much any type of wood can be cut using an angle grinder if you adjust the disc and handle accordingly.

Read More:   How to Use a Shop Vac? Get the Best Use Out of Your Shop Vac

What Can Angle Grinders Cut?

The safest way to cut wood with an angle grinder is by using a masonry/tile cutting wheel because they’re designed for cutting through stone, bricks and tiles (basically anything that’s extremely hard). As such, it would be better to describe these types of discs as grinding wheels instead since they won’t get caught up in softer material like wood; on top of that, it will last longer than a metal cutting wheel stored inside your toolbox.

Using a metal cutting wheel is still possible if necessary, but it will decrease the lifespan of the disc so take this into consideration when you’re getting ready to cut wood with an angle grinder. There’s also no guarantee that it’ll last long enough to finish your job at hand, so it would be better to invest in a separate masonry/tile cutting tool for this application instead.

The best way to cut through wood with an angle grinder is by using a metal cutting disc designed specifically for soft material since they have more teeth and are built differently than grinding wheels made for harder materials. As such, there won’t be much chance of a spark flying back at you as the disc goes around due to some type of obstruction because these types of discs aren’t as efficient and they can get caught up in wood easily.

If you’re cutting through a hard material like metal or stone, then use a masonry/tile cutting wheel instead because it will last for a long time if used properly. As such, keep an eye on the disc at all times to make sure it isn’t getting caught up on anything that’s making it difficult to cut more efficiently.

To be honest, there really is no recommended application for using an angle grinder with a saw blade since the risk of injury would be maximum since these saw blades are extremely sharp! If one were to attempt this without protective gear (face shield, goggles), then the lens could shatter from impurities found within the piece being cut which could cause a serious injury to the eyes.

Goggles can also save your eyes from toxic fluoride dust if there’s any flying in the air when you’re cutting through tile for example, so it would be wise to invest in a pair of goggles that fit well with your face shield and make sure they’re fitted properly before beginning any type of angle grinder work at hand.

In regards to hearing protection, ear plugs are usually the way to go since they don’t interfere with communication or cause problems when worn underneath a hood or respirator mask. On top of that, you won’t have any interference issues when using an angle grinder because these types of tools create too much noise for headsets and hardhats to handle effectively.

Two of the main points to consider when using an angle grinder are eye protection and ear protection. Just make sure you don’t wear goggles underneath a face shield or vice versa since it’ll cause them both to fog up which will greatly decrease your visibility while working on a project that might be hazardous if you can’t see what’s going on around you.

As long as proper precautions are taken, then there shouldn’t be any issues with cutting wood with an angle grinder. With that being said, it’s still recommended that you use a separate saw blade for this purpose because, as mentioned before, they’re extremely sharp and could pose major safety hazards if used incorrectly unless their intended use is for metalwork.

Read More:   Best Contractor Table Saw in 2022: Unbiased Reviews & Buyer’s Guide

Sawhould You Cut Wood with an Angle Grinder?

blades are extremely sharp, so they’re designed for cutting through materials that are much harder than wood. This is why it’s recommended to use a separate saw blade for this type of work instead since you won’t have to worry about sparks flying back onto your face or anything else that could become dangerous when working close with an angle grinder.

When cutting through wood with an angle grinder, make sure you wear goggles and ear plugs at all times to protect yourself from serious bodily harm! It’s also better to invest in a different saw blade for wood rather than using one meant for metalwork applications since the lifespan of the blade would be shortened considerably due to the extra work it has to go through while dealing with wood on top of metal or stone.

That being said, it’s not recommended to use an angle grinder to cut wood or tile since these types of blades are meant for cutting through harder materials that won’t put the blade at risk of becoming damaged from working with a different type of material. As such, a separate saw blade should be used if you want to cut any other type of building materials apart from metal and stone because the lifespan of your blade will be decreased exponentially due to having to push hard against a softer material instead of going through its intended application without any problems.

As long as you’re careful when using an angle grinder with a saw blade attached as well as wearing protective gear like eye goggles and ear plugs, then there shouldn’t be much issues with cutting wood with one. Just keep in mind that these blades are usually meant for cutting through harder materials and should be switched out for a separate saw blade if you want to go about cutting things like tile or any other type of building material apart from stone or metal.

It’s not recommended that an angle grinder be used to cut wood since the blade will experience added stress and could therefore become damaged faster than it normally would when going through its intended application (be it cutting metal, stone, etc.). As such, we recommend using a different saw blade designed specifically for this purpose to make sure you don’t shorten the lifespan of your current angle grinder!

Conclusion

It is possible to cut wood with an angle grinder, but you should use a different saw blade designed for woodcutting rather than attempting this with the one meant for cutting metal! There are too many safety risks involved since these types of blades are extremely sharp and could pose major problems if not handled correctly. So make sure you wear protective gear like eye goggles and ear plugs when using an angle grinder to ensure that you’re as safe as possible while working with any power tools!

Why trust Handyman.Guide?

s written by Itamar Ben-Dor, who has 25 years of experience in renovations, carpentry, locks, creation, landscaping, painting, furniture construction, and furniture renovation, works with concrete, plumbing, door repair, and more.

Itamar Ben-Dor has been in the home improvement business for over 25 years. Itamar Ben-Dor is a jack of all trades. He's worked in the renovation field for years, doing everything from locksmithing to carpentry. He's a small repairs specialist. But his true passion lies in furniture construction and renovation - he loves seeing old pieces come back to life with some new woodwork or a fresh coat of paint.

He has taken courses on many topics in these fields at professional colleges in Israel. Over the years, Itamar has also become quite skilled in gardening, carpentry, and renovations. He's worked on projects of all sizes, from massive renovations to small repairs. No job is too big or too small for him!


Disclosure: handyman.guide participates in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for publishers to earn fees by linking to Amazon.com and affiliated sites.

Itamar Ben Dor

Itamar Ben Dor

My father is a practical engineer, and as a hobby he was also involved in construction, renovations, carpentry and woodwork at home; So there was always tools, saws, drills and more at home. Already I was a little kid Dad and I would renovate the house. Once we built a shed for garden tools, once we did flooring for the garden, once we renovated the bathroom and that’s the way it is. Long before there was an internet, directories and plans. We would build things, kitchen cabinets, install electrical appliances, do flooring, pour concrete and more ... I in this blog want to pass on to you the experience I have gained over the last 20 plus-minus years since I was a child to this day and give you information about the best tools, project plans, guides and more.

HandyMan.Guide
Logo