We research in-depth and provide unbiased reviews and recommendations on the best products. We strive to give you the most accurate information. If you buy something through our links, we may earn a commission.
Before you begin shopping for new shower lights, make sure you know what type of bulb to buy. Before purchasing any new bulbs, you should read the manufacturer’s datasheet to determine their size. To make sure that you buy the right bulb, measure the old bulb to determine the new one’s diameter. The diameter is measured in eighths of an inch. If your old bulb is twenty eighths of an inch in diameter, you need to purchase an R20, BR30, or PAR30 bulb.
Depending on where you install the light, you should consider whether to buy wet-rated or damp-rated fixtures. Wet-rated lights are water-resistant and offer greater protection from the elements. In addition to this, they can be installed in exterior wet locations and interior damp areas. Depending on the type of light you’re looking for, you should ask an electrician to recommend the right type for your specific situation.
The type of fixture that meets your requirements is the most important consideration. Wet-rated fixtures withstand prolonged exposure to water and are designed to last a long time, even if the fixture is exposed to water continuously. UL and ETL both have guidelines and standards for wet-rated fixtures. The UL and ETL are the most widely recognized. Choose the best one for your needs and your budget. Wet-rated lights offer a lot of benefits over non-damp fixtures.
Choosing a wet-rated shower light will increase the overall intensity of your general area lighting in your bathroom. It also helps to choose a glass or frameless shower enclosure, as these types of enclosures allow more light to penetrate. Additionally, you can choose light colors and clear domes to replace dark surrounds. You can also choose a gimbal recessed light that rotates toward the shower for better illumination.
Another thing to look for is the certification of the light itself. Make sure the light has the wet-rated seal by reading the labels. Underwriters Laboratories was founded in 1894, and focuses on testing lighting products. UL tests make sure products are safe to use. UL labels products with this seal, but a wet-rated light can be installed in a non-damp-rated area, too.
Whether or not GFCI protected shower lights are necessary depends on the location of your light. A damp location such as a bathroom typically requires GFCI protection, and you must install the lights on a circuit with GFCI protection. You can only know for sure by looking at the instructions provided with the light fixture. GFCI protected shower lights are the most common choice for bathrooms. They are a great choice for many reasons, including safety.
When putting light fixtures in bathrooms, a GFCI outlet is highly recommended. The GFCI outlet protects against electrical surges and prevents potential injury. Some homeowners question whether lights and outlets can be put on the same circuit as outlets. It is permitted and widespread, but it’s important to follow the instructions on the label. GFCI outlets are safer than non-GFCI outlets because they have the ability to reset themselves if an unexpected power surge occurs.
A GFCI protects outlets and switches below the shower area from electrical short circuits. GFCI protected lighting fixtures reduce the risk of electrocution and other serious injuries. It also protects the bathroom from damaging moisture. Even though the NEC does not require the use of GFCI protected fixtures in bathrooms, many manufacturers require them. Fortunately, they are also cheaper and easier to install. They are also more durable than standard lighting.
GFCI protection is an important safety precaution for bathroom outlets. While the National Electrical Code doesn’t require GFCI protection for shower lights and bathroom exhaust fans, many manufacturers specify the presence of GFCI in their installation instructions. Additionally, if the fixture has a switch, a GFCI outlet might be required for it. Whether or not you have GFCI protection is important for your home is entirely up to you.
To get the right bulb for your shower, you should first know what size your light is. If you’re using an existing light fixture, you’ll find the dimensions on the datasheet for the trim and housing. If not, you should measure the diameter of the old bulb to ensure you get the correct size. Light bulbs are usually measured in eighths of an inch, so if your old bulb is 20ths of an inch, you’ll need a R20 bulb, or a 30ths of an in. A PAR30 bulb is another option.
You should also check for the wet and dry ratings on the light fixtures. These ratings will let you know where to install the light fixture, as damp-rated lights may not work properly in wet environments. You should also be sure to purchase wet-rated fixtures if you plan to use your light in a wet environment. While wet-rated fixtures are ideal for indoor locations like bathrooms, wet-rated lights can be installed in uncovered areas like decks.
When choosing shower lights, you should also consider where the lights will be placed. Because lights rely on electrical currents, water can cause electrical fires. Wet-rated lighting fixtures are designed to keep water away from the wiring, preventing any electrical contact with the light. While wet-rated lights are not as bright as their dry counterparts, they can still provide ample light. If you’re concerned that your bathroom shower light might get damaged by water, make sure you select a bulb that meets these standards.
When it comes to shower lights, it’s important to consider the moisture-proof type. This type of light is designed to resist water and humidity in the area around the fixture. They’re suitable for both indoor and outdoor use, but the most important thing is that they don’t come in direct contact with water! Wet-rated bulbs will withstand moisture, while dry-rated bulbs can withstand short exposure to water, but should not be exposed to direct water contact.
The color temperature of your shower lights can make all the difference in how your room feels and looks. Different colors create different moods, depending on their kelvin temperature. The Kelvin temperature range is from 1,000 to 10,000. Warmer colors produce a cozier feeling, while cooler colors are more inviting and crisp. This feature is important because it affects the way your light bulb makes you feel. However, it is important to keep in mind that the warmer Kelvin is not necessarily the best option for your bathroom.
The color temperature of your shower lights should be at least 3,000 Kelvins. You can even buy warmer color temperature lights for your bathroom to evoke a warmer feeling. Alternatively, if you want to give your bathroom a sleek, modern look, you can select lights with a temperature of 3500K or 4000K. These lights will provide a bright, crisp light that will make your room appear more spacious.
When selecting the color temperature of your shower lights, choose the ones with the right CRI. High CRI (Color Rendering Index) bulbs will bring out natural color contrasts, giving you a realistic appearance in your bathroom mirror. They also combine the correct color temperature in Kelvins and CRI to produce the most effective bathroom lighting. A high CRI bulb is the most desirable option for this purpose. You can also find a CRI of 92 in a light bulb that matches your home’s color temperature.
You can choose either warm or cool light for your shower. Warm light gives a cozy feeling, while cool lights give you a clear view. Regardless of your color preferences, the right light can enhance your mood and make you feel more comfortable in any situation. You should choose a shower light that complements your decor and matches your personality. If you are looking for a warm, cozy feeling, choose a 2700K light.
You should consider safety zones when purchasing shower lights. The first zone includes the area directly above the bath or shower tray. You need a light with an IP44 rating or higher. The second zone covers the area 0.6 m from the perimeter of the bath or shower, and 2.25 m from the floor. For zone one, you need a light with an IP20 rating or higher, as it is not protected from water spray.
You should also consider the IP rating. Zone 0 and zone 1 are both considered to be inside the shower. Usually, this area does not receive water, but it is still a risk zone. You should also consider the IP rating of the shower light. An IP44-rated light will keep you safe from electrical shock and prevent fittings from becoming loose due to the steam. To find out which zone your shower light belongs to, consult your electrician.
Electrical hazards are most prominent in zone 0, which is anything inside the shower basin or tub. Anything installed in zone 0 should be IP67-rated and rated for total immersion. Also, no ventilation products should be installed inside the zone 0 zone. If you want to use a ground shower light, you should check the IP rating to ensure that it meets safety requirements. You should avoid installing a ground shower light, as this area is prone to moisture.
There are also strict regulations regarding lighting in the bathroom. Bathroom lighting must meet a minimum IP rating, which refers to the distance of a light fitting from the water source. Most types of lighting are suitable for outside zones, but always check with an electrician. The best way to choose the right bathroom lighting is to consult with a professional electrician and read the product description before making your purchase. You should also consider purchasing the right IP rating for your lights.