How to Choose a Shower Heat Lamp

We research in-depth and provide unbiased reviews and recommendations on the best products. We strive to give you the most accurate information. If you buy something through our links, we may earn a commission.

It is important to select a shower heat lamp that is big enough for your bathroom. Compared to a traditional heat lamp, heated air retains moisture better. It becomes the primary retainer of humidity and prevents condensation on cold surfaces. Moreover, a shower heat lamp can even bring in lower humidity air. The right shower heat lamp will improve your bathroom’s temperature while making it more comfortable for you to use. Here are some tips to choose a good shower heat lamp.

Red bulbs give more heat

A red heat lamp bulb gives off a warm glow while clear bulbs are just as effective. Red bulbs also give off less heat than the equivalent amount of light from a white bulb, so you may want to try them if you have a timer. Also, red bulbs are more expensive than the white variety, so you should be careful if you plan to install one of them in your bathroom. Depending on your bathroom needs, you can use different kinds of bulbs and get the right one for your needs.

Modern heat lamps are much more compact and appealing than their older counterparts. Manufacturers have developed light bulbs that produce infrared radiation. These newer heating bulbs give immediate heat when switched on and can withstand splashing and moisture. They can also last a long time. You should choose one with a long warranty and good reviews. Make sure to read the product description before making your purchase. Make sure to purchase the right heat lamp for your needs.

Automatic thermal cutout prevents overheating

To prevent your shower heat lamp from overheating, install an automatic thermal cutout switch. These switches automatically shut off the heating element when the water temperature gets too high, saving energy and potentially causing damage. If you do not want to deal with a potentially dangerous short-circuit, you should check the lamp’s resistance with a multimeter. If the resistance reading is between 11 and 18 ohms, the heating element is functioning properly. Otherwise, your shower might not be warming up at all. Another possible reason for this problem is a broken thermal cutoff switch (TCO). These switches are designed to shut down your shower if the water temperature goes over a certain point.

Heat lamps are typically installed on the ceiling. When installing one, make sure it is installed in the correct type of fixture. If the heat lamp does not fit properly, the bulb will not produce the desired amount of heat. Make sure the position is also carefully selected to prevent it from overheating. Also, do not install the heat lamp too close to any objects. Ensure that the shower heat lamp is placed safely in the right spot.

Infrared light

An infrared light shower heat lamp is a device that envelops a person in thermal wellness. Unlike traditional heating and cooling methods, an infrared light shower heat lamp requires no installation and can be controlled by a remote control, smartphone app, or other devices. The infrared light is highly beneficial in low-air-temperature environments, such as showers, and can be used to illuminate the entire ceiling or walls up to a certain height.

Infrared lamps emit 96% or 50% of their heat as radiation. The radiation does not move, and it passes through the air without heating or drying the environment. This type of lamp is much healthier than a traditional stove, which can dry the air and raise dust. These lamps are also incredibly portable, making them ideal for any home. Their well-designed panels also help to keep ascending hot air currents to a minimum.

Read More:   How to Drill Hardened Steel - Best Guide

The newest versions of infrared light shower heat lamps have a streamlined design and are more attractive than their predecessors. They use energy-efficient LED light bulbs instead of halogen bulbs, which can be inconvenient if you want to use one in a bathroom, but much more expensive. Heat lamps are also very safe to use, and most will work in a wet environment without damaging the surrounding environment. They are usually set to provide immediate warmth when turned on. They can handle splashing and moisture and last for a very long time.

Infrared light shower heat lamps are available in different styles and prices, and you can find one that will best fit your needs. Some are cheap and easy to install, while others are more expensive and use multiple bulbs. Some are even fan-operated. As demand for these devices has increased, their prices have also decreased, though more expensive versions are likely to have a higher price. You can also purchase the bulbs separately and wire them yourself.

Electricity consumption

A heat lamp provides light and heating, and is much more convenient than an incandescent bulb. These lamps require only 200-250 watts of electricity to operate. A heat lamp lasts about five years, and its light bulb is easily replaceable. One disadvantage is that it can’t be used in the entire bathroom. It needs to be placed close to the vanity area. In addition, heat lamps have a short range.

Before installing a shower heat lamp, you should consider its size. Some models are designed to give off light and heat, and others are primarily used as a heat source. You can purchase a lamp that offers both functions and, if you’ve got a small bathroom, a combination light and heat lamp. Make sure you can switch the two separately and safely. If you need more light and heat, choose a lamp that has a smaller size than the typical one.

A shower heat lamp should be installed properly in order to prevent a fire. While it’s fairly easy to install, it is important to wear safety goggles and appropriate clothing. Long sleeve shirts are useful for protecting your skin from sparks. A grounding wire is essential to prevent current conductivity. It’s important to check the electrical code before you start installing the heat lamp, and consult a professional if you have any questions.

A heat lamp should also be able to deliver adequate heat. Most of them feature a built-in fan that can disperse the heat throughout the bathroom. The higher the wattage of the lamp, the more powerful the heat produced. Then, you should also look at the size and number of bulbs inside the lamp. There are heat lamps that contain multiple bulbs. Be sure to check the wattage of the bulbs in order to choose a shower heat lamp with the right amount of power.


The place where you will stand while showering is crucial for the effective placement of a shower heat lamp. They are usually mounted on the ceiling, and should be angled down to the area where you will stand. Smaller bathrooms and those with low ceilings will be better suited for these lamps. Make sure to keep the heat lamp away from your body and from any clothes or towels that will get caught in the steam. If you have the luxury of a second bathroom, place the heat lamp there, but not too close to anything, as this will make it difficult to regulate the temperature.

Read More:   How to Flush a Water Heater

Unlike the kitchen, bathrooms are generally tiled, so installing a heat lamp will improve the temperature of the bathroom. Hot water will make you feel more comfortable, but cold tiles will interfere with your relaxation. A heat lamp will ensure that the tiles stay warm and comfortable, while at the same time providing extra heat. And you don’t have to spend hours getting ready in the morning – your bathroom will be toasty in minutes!

A heat lamp will not replace the standard heating of your bathroom, but it will create smaller pockets of warmth that can be felt when you need the heat. Choosing the right place for a heat lamp is crucial because you don’t want it to interfere with your shower rails or towels. Heat lamps range in price from as little as $10 to as high as $100, with some models having extra features like fans. Due to their popularity, prices have come down over the years.

Why trust Handyman.Guide?

s written by Itamar Ben-Dor, who has 25 years of experience in renovations, carpentry, locks, creation, landscaping, painting, furniture construction, and furniture renovation, works with concrete, plumbing, door repair, and more.

Itamar Ben-Dor has been in the home improvement business for over 25 years. Itamar Ben-Dor is a jack of all trades. He's worked in the renovation field for years, doing everything from locksmithing to carpentry. He's a small repairs specialist. But his true passion lies in furniture construction and renovation - he loves seeing old pieces come back to life with some new woodwork or a fresh coat of paint.

He has taken courses on many topics in these fields at professional colleges in Israel. Over the years, Itamar has also become quite skilled in gardening, carpentry, and renovations. He's worked on projects of all sizes, from massive renovations to small repairs. No job is too big or too small for him!

Disclosure: participates in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for publishers to earn fees by linking to and affiliated sites.