How to Use a Honing Guide

We research in-depth and provide unbiased reviews and recommendations on the best products. We strive to give you the most accurate information. If you buy something through our links, we may earn a commission.

If you have ever been curious about how to use a honing guide, read this article! You will learn how to use the Kell MkII, Veritas MkII, and Sharp Skate III. Then, you’ll know which of them is right for you. You can even get the guide to give your friend a helping hand! Listed below are some of the benefits and features of each.

Sharp Skate III

If you’re wondering how to use Sharp Skate III honing guides, read on to find out. These tools are the most commonly used for side sharpening and are available in many price ranges. If you’re just starting to sharpen your own tools, you may want to consider investing in one of these guides. They’ll help you get your edge sharp and maintain a consistently high level of sharpness.

The sharp-skate is directional, which makes side sharpening easy and quick. The Sharp Skate is easy to use, but you’ll need to maintain the mindset of freehand honing to get the most out of it. This can be frustrating if you’re used to using a front-and-back honing guide and don’t understand the advantages of a directional sharpening guide.

One of the main benefits of this guide is its versatility. It works with virtually any sharpening plate, and can be angled up or down by adjusting the knobs at either end. It has a range of settings from 25 to 30 degrees, and you can even hone a skewed blade with the help of the included honing stones. Aside from this, the system comes with a variety of accessories, including finishing and preparation hones.

This guide is made to hold tools securely and is well-grip. While this guide can be difficult to use on wide bench stones, it is sturdy and handles a variety of tools. This is why the HS system is so versatile. The SS3 is much more versatile and has the ability to accommodate a variety of tools, including secondary bevels. However, you may need to adjust for the thickness of your stone to get the most out of this guide.

You can use the cross-grinder to sharpen your skate blades. It is designed to grind away minor edge blowouts and burs. However, you should not use it to sharpen your skates on a continuous basis. Excessive use of it can ruin your skate blade. It is best to keep this tool in your skate bag and get it sharpened regularly. When you have to sharpen your skates frequently, you may want to purchase the flatbottom V honing guide.

Veritas MkII

This deluxe honing guide comes with two clamping heads, a narrow and standard one, and an angle registration jig. Its straight and camber roller bases allow you to adjust the honing head to fit blades from 1/8″ to 2-7/8″ in width. The clamping head also allows you to change the angle of the blade for perfect symmetry and edge definition.

Unlike traditional honing methods, the Veritas MkII honging guide eliminates guesswork in blade sharpening. It is extremely versatile, allowing you to sharpen almost any chisel or plane iron. The metal construction and precise machined brass and steel parts are built to last. You can expect to be sharpening knives and chisels for years to come with a Veritas honing guide.

Read More:   How to Build a Cornhole Board

The Veritas MkII honging guide features slightly concave jaws that are designed to grip the blade’s corners evenly and with equal pressure. The jaws should fit snugly at all four corners and have the same level of tension. Once you have them in place, you can tighten them with finger pressure. Once tightened, the paint will come off the jaws, improving the grip.

The Veritas MkII hong guide is durable and easy to use, but the rotary honing mechanism can’t maintain squareness of the tool even with light pressure or coarse sand paper. That’s a systemic flaw with this honing guide, and you should be able to adjust the tension in your machine to get the perfect result. This review will help you choose the best honing guide for your needs.

The Veritas MkII honer has interchangeable rollers that fit snugly to the clamping heads. The eccentric axle mount adds a micro-bevel to any angle setting. The straight roller is a good option for sharpening narrow blades, and a 2″ wide barrel-shaped camber roller is ideal for planing. In addition, the guide’s roller is adjustable to any angle, allowing you to adjust the angle to get the most optimum result.


A Kell honing guide is one of the best tools for sharpening knives. This device clamps to the sides of the blade while it is being sharpened. There are a few advantages of this tool over other honing guides. The first is its simplicity. The Kell guide is easy to use and has a small footprint. However, it is quite expensive. However, if you’re looking for the best sharpening guide on the market, this guide is the answer.

The Richard Kell No.3 MkII is the Rolls-Royce of honing guides. It features a polished brass plate that is made from engravers’ compo sheet, which is guaranteed to be flatter than regular brass sheet. It is secured with two hardened steel dowels that register the blade at 90 degrees. A wooden wedge keeps the blade in place. There are a number of advantages to the Richard Kell No3 honing guide, but it’s important to choose the right one for your specific needs.

A Kell honing guide has a jig that clamps the blade between two Ertalyte TX wheels that are smooth to the touch and low in friction. The jig’s plastic rollers cushion the blade from slipping out of position and are adjustable for width and angle. The Kell jig can accept chisels from a width of 0 to two 5/8 inches.

Another advantage to a Kell honing guide is its ease of use. The Kell honing guide is easier to adjust than other honing guides. The Kell honing guide can be used on waterstones and mortise chisels. It is easy to use and is very effective in honing. This guide will help you to sharpen your knives and other tools.

A Kell honing guide is a must-have for sharpening knives. The Kell honing guide comes in two sizes, the Small and Large. Both are solid brass or stainless steel and will clamp a blade up to 2 5/8 inches wide. The Large guide is great for sharpening plane irons, as the wider diameter wheel makes tuning the bevel angle easier. You may want to purchase a set for each tool.

Kell MkII

There are many ways to use a honing guide, but one of the best is the Kell MkII. This tool clamps against the sides of your tool for precision honing. The adjustable eccentric roller is especially useful for fine-tuning angle settings. If you’re not sure what kind of guide to buy, consider reading our review below. There are many benefits to this hone guide, including the versatility of its features.

Read More:   How to Make Accurate Cuts With a Miter Saw?

The Kell jig is made from solid brass and stainless steel. It clamps the blade between a pair of Ertalyte TX wheels. The wheels are matched with a precision tolerance of one thousandth of an inch, making them superior to many other guides on the market. The two guides are sized to hold blades up to two and a half inches wide. The Large Guide is also ideal for sharpening plane irons and other large-size blades. The larger diameter wheels make tuning the bevel angle easier as they require more extension and a larger blade.

Another advantage of the Kell MkII honing guides is the capacity to hold a skew blade. Skew blades are difficult to hone, but the Eclipse model fits two-inch-wide blades and two-and-a-half-inch-wide straight blades. The guide is not designed for chisels, but it does work well for straight blades.

A Kell MkII honing tool is made by Richard Kell and costs between $20 and $100. The guide itself is two-parts, one of which holds the tool and the other half has a roller for moving back and forth. This design makes it easy to use for a wide variety of sharpening applications. In the long run, it will give you a better sharpening.

Why trust Handyman.Guide?

s written by Itamar Ben-Dor, who has 25 years of experience in renovations, carpentry, locks, creation, landscaping, painting, furniture construction, and furniture renovation, works with concrete, plumbing, door repair, and more.

Itamar Ben-Dor has been in the home improvement business for over 25 years. Itamar Ben-Dor is a jack of all trades. He's worked in the renovation field for years, doing everything from locksmithing to carpentry. He's a small repairs specialist. But his true passion lies in furniture construction and renovation - he loves seeing old pieces come back to life with some new woodwork or a fresh coat of paint.

He has taken courses on many topics in these fields at professional colleges in Israel. Over the years, Itamar has also become quite skilled in gardening, carpentry, and renovations. He's worked on projects of all sizes, from massive renovations to small repairs. No job is too big or too small for him!

Disclosure: participates in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for publishers to earn fees by linking to and affiliated sites.