We research in-depth and provide unbiased reviews and recommendations on the best products. We strive to give you the most accurate information. If you buy something through our links, we may earn a commission.
If you’re looking for a quick and easy way to bevel a pipe, then you’ve come to the right place. You can learn how to bevel a pipe with a pipe bevel or Veritas blade, as well as with a Strike block plane. This article will walk you through these methods and more. Once you’ve learned how to bevel a 37 degree angle, you’ll be ready to tackle your next bevel job!
Pipe bevel
What’s the difference between a pipe bevel and a square cut? A pipe bevel is an angle formed at the ends of a pipe. Its purpose is to facilitate welding between two pieces of pipe. It also requires fewer materials, less heat and a shorter welding time. A 37-degree angle joint is made possible by the surface tension of the molten metal, which produces a concave surface.
Various methods of pipe beveling are available. Hand grinding is the most traditional method, but it is not only inefficient and dangerous but it also creates a mess. Another option is to use a torch or plasma cutter. These machines produce better results than hand grinding. The downside of hand-beveling is that the flat land at the end of the pipe must be prepared manually. This is unsafe and inconsistent.
Alternatively, you can use a double-V bevel. Double-V bevels are often made in pipe welders. They require double-sided welding, and the pipe must be turned over after welding one side. It is a good choice for thin-walled pipes, but thick-walled pipes should be handled with care. It’s a common mistake to make mistakes while welding.
The Type II expend positioning pipe beveling machine is a multipurpose device that enables you to process the end of a pipeline of varying specifications. The machine has automatic knife-tooling mechanisms and is capable of cutting the inner diameter of a pipe. It works well on various grades of steel, including stainless steel, alloy steel, and carbon steel. It also works well on special hard engineering materials, which are commonly used in heavy pipe installation and pipeline repair operations.
Veritas blades
Veritas bevel-up bench plane blades are suitable for use on a wooden plane. Their thick blades are also useful for wood planes, since they minimise vibration. These blades are available in a variety of materials and are suitable for bevelling a 37 degree angle. In addition, the Veritas bevel-up bench plane blades are available in 25, 38 and 50 degrees.
The Veritas low angle block plane is six inches long and has a 25 degree bevel blade. The combination of the 12 degree bed angle and the 25 degree bevel on the cutting edge results in a 37-degree cutting angle. Using this plane requires more effort, but its sturdiness and durability are well worth the price. Veritas blades for bevelling a 37-degree angle are sold in separate packages, with one blade containing two sets of bevels, the other for bevelling a 35-degree angle.
The 38-degree blade is only offered for demonstration purposes, since it isn’t appropriate for use on difficult woods with reversing grain. The 62-degree blade produces a Type II chip that occurs when the wood fails at the cutting edge. This chip will eliminate tear-out on woods with difficult grain patterns. The Veritas Jig is suitable for bevelling a 37-degree angle, but it’s not recommended for cutting wood at this angle.
The O1 bevel is the weakest of the three, but the A2 is stronger. The A2 bevel is more suitable for the hardest woods. Compared to the O1, A2 blades are recommended for bevelling a 37-degree angle. They’re also compatible with all other bevel angles. It’s not hard to sharpen a Veritas blade.
Strike block planes
A striking block plane provides a low cutting angle. A low angle end grain is easier to plane than one with a standard angle. The block plane can also be used on figured grain. The blades are flat, allowing the tool to bevel the material with an even, low-angle cut. A strike block plane provides a low cutting angle, but is not as effective as a bevel down plane.
If you are looking to buy a block plane that will bevel a 37-degree angle, the Stanley No. 60-1/2 block plane is a good choice. However, if you’re in a tight budget, a cheaper model from Lie-Nielsen may do the job as well. A normal angle block plane can also be used. Strike block planes to bevel a 37-degree angle are not difficult to find.
A low-angle block plane is easier to use and has a rounded iron cap that feels natural to hold. Pressing the sole against the wood can help you remove wavy machine milling marks and smooth saw marks. Some models also come with an adjustable mouth, which can be adjusted with an eccentric lever. A smaller opening is better for finer work, while a larger one is good for rougher jobs.
Strike block planes have the same physics as their bevel-down counterparts, but some models are designed to bevel at a higher angle. This allows the user to switch between a low angle for end grain work and a high angle for figured wood. Both Lie-Nielsen and Veritas bevel-up planes have the same features. A small difference could be in the finish or fit of the tool.
Microbevel
Creating a microbevel is the process of making a bevel with a smaller bevel. It involves cutting away a thin layer of steel, called a primary bevel, to produce a secondary bevel with a greater angle. The secondary bevel is then added to the primary bevel, creating a final included angle of 47 degrees. The Veritas Honing Guide Mk II has a camber roller, which is useful for adding a little camber to a bevel.
Microbevels are commonly used for fine trimming and other similar work. The bevel angle affects the depth of penetration and the effectiveness of the edge, but not its sharpness. Sharpness is determined by the way two sides meet in one plane. The lower the angle, the easier it is to penetrate a workpiece. However, sharp edges do not affect cutting efficiency. In fact, they can even strengthen the edge.
Microbevels require a different technique than traditional bevels. The first step is to use the 1000 Shapton stone to make a micro bevel. Once the blade is sharpened to an even wire edge, use an 8000 waterstone to remove the wire edge. This step allows the knifemaker to judge whether or not the next stone has honed the edge of the bevel. If it has, move to the next step, the coarser grit.
A high-angle smoothing plane is used for face grain. This type of plane is used for making the final bevel. The BU plane requires a greater camber angle than the BD plane. For example, a 25-degree plane has a greater camber angle than a 50-degree plane. A 50-degree plane will require more steel to cut the same profile. A 60-degree plane has the same angle, but it has a lower bed angle.
Keeping a clearance angle
When bevelling a 37-degree angle, a regular angle plane has the same clearance angle as a BD plane, but it is much weaker than a 45-degree bevel down plane. This difference makes removing the wear bevel easier in a BU, but less difficult in a BD. In either case, the back bevel will remain, so the difference is moot.
