How to Install a Wall Anchor

We research in-depth and provide unbiased reviews and recommendations on the best products. We strive to give you the most accurate information. If you buy something through our links, we may earn a commission.

You’ve probably heard of the Molly bolt, Rocker bolt, Plastic wing anchor, and Toggle-bolt, but how do you install them? This article will give you an overview of each type. Whether you’re installing an anchor to attach a picture or to hold up a picture, you’ll be glad you read this. There are many different types, but they all require a bit of expertise and a bit of experience.

Molly bolts

When wall-anchored objects fall out, using Molly bolts is an excellent solution. These anchors have a slotted sleeve that spreads as the machine-threaded screw tightens, creating a strong purchase. Molly bolts are most effective on drywall, but they can also be used in plaster-and-lath walls. Choosing the right one depends on the type of wall anchor and the weight of the object.

Because they have pointed ends, they can be driven into the wall without creating a pilot hole. However, you should drill a pilot hole that is about half the width of the sleeve. The tip of the molly bolt should fit into the hole. Then, drive the bolt in with a hammer. Typically, you should use a light tap, but you should not over-drive the bolt. Drive the molly bolt until the collar is flush with the wall.

Molly bolts are similar to small plastic anchors, but they are much more reliable wall mounts. Unlike plastic anchors, Molly fasteners are very easy to install and can be removed without jeopardizing the anchor. In addition to being easy to install, molly fasteners are also easy to remove, which makes them a great choice for mounting mid-weight items like lamps, mirrors, and framed artwork. The bolts can also be used on sheet metal without compromising the anchor.

Once the drywall anchors have been installed, you can place the object in the desired location. Make sure to secure the anchor with a screwdriver and never over-tighten it. The legs of the molly bolt will expand as the screwdriver turns them. When they are fully expanded, back the molly bolt and screw in the new location. After the anchor is securely in place, the molly bolt should be backed out of the sleeve.

Rocker bolts

When using Rocker bolts as a wall anchor, you must drill a pilot hole before inserting the fastener into the wall. A hammer or a Phillips screwdriver is useful for this purpose. Some anchors also have wings that collapse or pop out. This prevents them from falling off the wall. In addition, you can use an awl to drill the pilot hole.

When using rocker bolts as a wall anchor, make sure to choose the correct size and type of screw for the job. Screws too small will not expand enough to bite into the wall, so you may end up damaging the anchor or surrounding material. A larger screw may cause the anchor to pull out of the wall and require a deeper hole. To prevent this, choose anchors made of metal or masonry.

You can use a hollow wall anchor. It looks like a small bolt wrapped in a pointed metal jacket. When hammered into a wall, the anchor expands into a mushroom-shaped anchor inside the drywall. Before hammering the anchor into the wall, you should first drill a hole to match the size of the pilot hole. Make sure the hole is slightly smaller than the collar of the anchor. Otherwise, the anchor will not sit flush against the wall.

Read More:   How to Clean Your Shower Head

To use toggle-bolt anchors, you must drill a three-quarter-inch hole into the wall and insert the toggle-bolt anchor. To hang something from this anchor, you must insert the toggle-bolt through the item to be hung. Toggling-bolt anchors have a 25-pound hanging capacity. To use toggle-bolt anchors, you will need a hole larger than normal anchors.

Plastic wing anchors

Plastic wing wall anchors are great for hanging drywall. Once pre-drilled, insert the anchor by folding the wings together and pushing it into the hole. Once inserted, tap the anchor until the flange is flush with the surface of the wall. To drive the screw into the anchor, you will need a special plastic pusher to push the wings open. After this, tighten the screw. The plastic anchor is now ready to hang your object.

Straight plastic anchors are cylindrical in shape and available in different lengths. They feature a hollow center that pushes the anchor walls outward against the drywall. To install the plastic anchor, drill a pilot hole in the wall using a Phillips screwdriver or rotary tool with a drill bit attachment. Push the anchor into the hole, making sure it is flush with the surface of the wall.

Plastic wing wall anchors are also available in several sizes. Those with large wings are better suited for heavy-duty applications, while plug anchors are thinner and are more suitable for medium-duty applications. In general, the larger the plastic anchor, the better. Its larger size is good for larger screws and offers the most holding capacity. The more heavily ribbed anchors are the strongest. They will hold heavier objects firmly.

Hollow wall anchors are another type of anchor. They are used to hang items on walls. They can be used with drywall or plaster and lath walls. However, these anchors need to be pre-drilled and properly tightened to prevent them from spinning inside the wall. To install the plastic wing anchors, you should make sure the wall is solid. Otherwise, you risk damaging the walls. So, always check the thickness of the wall and choose the appropriate anchor.


Toggle-bolts are great for hanging ceiling fans. But they are not always the best option when it comes to anchoring a ceiling fan. The weight of the fan can pull the ceiling away from the joists. Toggle bolts can hold ceiling fans securely in place. Here are some tips to keep your ceiling fan in place while installing toggle bolts. And remember to never forget to use a screwdriver.

First, you have to insert the toggle-bolt through the hole in the wall. Make sure that the wings open and close properly. Then, pull the toggle bolt until it presses against the wall. Then, tighten it slowly and check for levelness. When you are done, you are all set to hang your wall hanging. And now, if you are wondering how to use toggle-bolts as a wall anchor, here are some tips that will help you.

Toggle bolts are an excellent option if you want to hang heavy items without wall studs. However, you must ensure that the wall is hollow and strong enough to accommodate the weight of the item. Also, be sure to use the correct brackets with toggle-bolts. They can withstand a fair amount of weight, but you need to keep the nut under tension so that it doesn’t spin when the anchor is tightened.

Read More:   How Does a Dust Collector Work?

Another important aspect to consider before using toggle-bolts is the size of the hole. If the toggle bolts are too short, they may end up causing damage to the wall. The length of the toggle-bolt also matters because it must be long enough for the object to hang. Make sure the wallboard has enough space between the toggle-bolts and the drywall so that they won’t cause any damage to the drywall.

Plastic expansion anchors

If you’ve ever tried to hang a picture on a wall but had a problem, you may be wondering how to install plastic expansion anchors. These small, flexible screws are lightweight, but require extra care during installation. Too much force can strip the threads of the anchor and tear out the screw. If you accidentally drive one into the wrong place, you could lose your investment for $10. Here’s how to install plastic expansion anchors without causing further damage to your wall.

First, drill a pilot hole. The packaging of your anchor should tell you how big of a hole to drill. Next, tap the anchor into place. A rubber mallet works best for this task, but a screwdriver will also work. You can also use the claw end of a hammer to tap it into place. If you’re having trouble, you can use a flathead screwdriver or a small finish nailer.

To install plastic expansion anchors, you need to make a hole on the wall where you’d like to attach your screws. The hole should be large enough for your anchor to slide into. Once you’ve drilled the hole, you can start to screw in the anchor. When you’re done, you can use a rubber mallet to help you push it into the wall. Remember, this process takes a few minutes and is worth the effort.

Once you’ve prepared the hole, you can start installing your plastic expansion anchors. To do this, you’ll need a screwdriver or hammer and a plastic expansion anchor. Push the plastic anchor into the hole and insert the screw into it. Be sure to drill the hole so that it is smaller than the anchor’s diameter. After installing your plastic anchor, make sure the screw is the proper size so that it can grip the drywall.

Why trust Handyman.Guide?

s written by Itamar Ben-Dor, who has 25 years of experience in renovations, carpentry, locks, creation, landscaping, painting, furniture construction, and furniture renovation, works with concrete, plumbing, door repair, and more.

Itamar Ben-Dor has been in the home improvement business for over 25 years. Itamar Ben-Dor is a jack of all trades. He's worked in the renovation field for years, doing everything from locksmithing to carpentry. He's a small repairs specialist. But his true passion lies in furniture construction and renovation - he loves seeing old pieces come back to life with some new woodwork or a fresh coat of paint.

He has taken courses on many topics in these fields at professional colleges in Israel. Over the years, Itamar has also become quite skilled in gardening, carpentry, and renovations. He's worked on projects of all sizes, from massive renovations to small repairs. No job is too big or too small for him!

Disclosure: participates in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for publishers to earn fees by linking to and affiliated sites.