We research in-depth and provide unbiased reviews and recommendations on the best products. We strive to give you the most accurate information. If you buy something through our links, we may earn a commission.
There are many ways to unclog a toilet. If the toilet is full of toilet paper, you may need to remove it to clear the clog. You will need to use the right tools to do this, so read on for some suggestions. Toilet paper clogs can be removed by flushing them away with water, but you will likely need to buy new ones if you have no experience.
Ways to unclog a toilet
If you have a clogged toilet, there are several ways to clear it. A plunger, enzyme solution, or drain cleaner all work well to clear a clog. If none of these methods work, try one of the other ways to unclog a toilet. Here are some tips to make your next toilet run smoothly again. Also, remember to replace the toilet brush regularly. If the clog is difficult to clear, try one of the other methods.
Enzyme waste removal: This method is recommended for organic clogs. You can purchase it at home improvement stores and it is a friendly alternative to harsh chemicals. However, it will not work on non-organic clogs. Simply pour a few drops of the solution into the toilet bowl and wait for a few minutes. If the clog isn’t gone within an hour, it is possible that it will dissolve on its own.
Coat hanger: A coat hanger can be used as a toilet plunger. Uncurl the wire and push the debris down the plumbing pipe. If you have a full toilet, you can place a piece of cloth on the end of the coat hanger. Make sure to wear protective gloves and use hot water carefully. Alternatively, you can try a combination of hot water and dish soap. This method works well as long as the toilet bowl isn’t too full.
Using a plunger to unclog a toilet
Using a plunger to unclogged a toilet can be a simple task that is surprisingly effective. The plunger works by creating suction that will help unclog the clog. If a plunger fails to create enough suction, you may need to add petroleum jelly to the flange of the plunger to increase its effectiveness. Alternatively, you could also plug other drains before using the plunger.
To prevent a child from unclogging the toilet, you should lock the door to the bathroom and the flush lever. This way, they will not be able to gain access to the toilet or the bathroom. Remember that a child is a potential drowning hazard in any place with water. Parents should also teach children how to take care of the toilet. Always make sure to supervise the use of toilet paper in the bathroom.
The plunger can be used in a bathtub drain as well. To use a plunger to unclog a bathtub drain, insert it at a 45-degree angle to the drain. Then, push the plunger down until it touches the drain. If it does not, remove the plunger from the toilet and rinse it under a faucet. Afterwards, you can store it in a bucket for safekeeping.
Using baking soda and vinegar
You’ve probably seen people use baking soda and vinegar to clean their toilets. These ingredients have been used to clean for a long time. If you’re using them to unclog a toilet, make sure to drain the toilet bowl before proceeding. When using this solution, remember that vinegar and baking soda react aggressively. Don’t put too much vinegar in the bowl, or it will create an overflowing situation.
If you’re unable to unclog the toilet with the baking soda and vinegar mixture, a plunger will work best. This will force the baking soda down the pipe, unclogging it. While plungers can also be used to unclog a toilet, they may not be as effective as they’re made to be. The plunger will also push the baking soda deeper into the drain pipe, resulting in a clog-free toilet.
Another way to remove a toilet clog is to pour boiling water into the bowl and leave it for half an hour. The hot water and vinegar will help dissolve the clog and clean the toilet bowl. After half an hour, a single flush should clear the toilet. After the clog is removed, the bowl will look and smell cleaner. The baking soda and vinegar mixture will remove the clog and remove any unpleasant odors.
Using a wet/dry vacuum to unclog a toilet
Using a wet/dry vacuum can be an effective way to clear a clogged toilet. To start, you must remove all the water from the toilet bowl, then place the hose into the toilet drain. Wrap an old towel around the hose to help create suction. Hold the hose firmly while you run the vacuum to clear the clog. After completing the cleaning process, wipe down the toilet and wipe off any excess water from the drain.
If you are unsure about the suitability of your regular household vacuum, you can use an expensive wet/dry vacuum. However, make sure that it is specially designed for toilets. You can also use old towels to create a seal around the drain. Plug the hose into the drain of the toilet and turn it on inside the toilet. Make sure that the hose is positioned in the drain so that it will reach the drain and the bowl.
If the clog is stubborn, a wet/dry vacuum can help. It will extract the water and debris from the toilet bowl. The wet/dry vacuum can also push into the drainpipe to remove the clog. Place the unblocker in the bowl before the vacuum. This will push the unblocker into the drainpipe, and it will clear the clog.
Using a wire coat hanger
If you’re having trouble unclogging your toilet, you can use a wire coat hanger to clear the clog. First, you need to untwist the coat hanger so it is a long line. After that, place the line in the toilet and gently push the hanger down the drain. Often, this will remove the clog in the drainpipe.
To use a wire coat hanger to unclogged a toilet, start by removing the top of the wire. Unwind the wire hanger so that you can expose the hook at the bottom of the coat hanger. Wrap a rag around the wire so it won’t scratch the porcelain. Next, push the wire through the toilet until you can feel water coming out.
If this doesn’t work, you can use a snake. You can buy a snake that can bend and move along the pipe’s curves. Just be sure to wear rubber gloves or a rag to protect the porcelain. Once you’ve done this, you should be able to flush the toilet without a problem. If you’re not sure if using a snake to unclog a toilet will work, you can also try using a chemical product that has enzyme properties that can break down the organic matter in the pipes.
Another method that has worked well is using a wire coat hanger as a drain snake. To use a wire coat hanger as a drain snake, you first need to untwist the wire coat hanger, allowing it to become a straight wire. Then, you can use a rubber glove to put the snake into the drain. Finally, you need to flush the water from the toilet to clear the clog.
Using osmosis to unclog a toilet
Reverse osmosis systems are becoming more popular, and you may want to consider investing in one for your home. RO systems use water pressure to purify water, so the water pressure in your home should be adequate. A well water supply needs to have high pressure, and the higher the dissolved solids, the higher the pressure required for an RO system. The higher the pressure, the better the quality of the filtered water.
You can try osmosis to unclog your toilet by replacing hot soapy water with dirty water. The process is similar to using dish soap, but you should be patient and wait for the mixture to work. Depending on the size of your clog, this method may not work. In case your toilet is extremely clogged, you may want to try another method.