We research in-depth and provide unbiased reviews and recommendations on the best products. We strive to give you the most accurate information. If you buy something through our links, we may earn a commission.
Clogged toilets are a common plumbing issue. While a clogged toilet can be alarming, a simple process will unclog it quickly and easily. All you need is a toilet plunger and a few minutes to solve the problem. Read on to learn how to unclog a toilet with a plunger and other methods. Listed below are some tips to help you fix your clogged toilet and save yourself some money.
Using a drain snake to clear a toilet blockage
When a plunger isn’t working, it might be time to turn to a drain snake. The drain snake’s coiled end can reach deep into the toilet, so it’s an effective tool for solid objects. Most drain snakes are made of stainless steel, so you don’t have to worry about scratching the porcelain. However, you should wear gloves when using a drain snake, because it may scratch the toilet’s porcelain.
A drain snake, also known as a drum auger, is a simple hand-operated device that can clear a toilet’s blockage. These are relatively inexpensive and can save you from paying a plumber. While it can be tough work, they can be a great alternative to calling a plumber. They are also great to have on hand in case you run into a clog.
Using a drain snake to clear clogs is not recommended for toilets made of porcelain. The cables of drain snakes may scratch the porcelain. If you have a drain snake, use one that fits your toilet. If it doesn’t fit, try a coat hanger instead. A coat hanger’s hook is more likely to work and won’t scratch the toilet’s porcelain.
If a drain snake can’t clear the blockage, you may have to use a wire drain auger. These devices consist of a telescoping metal tube with a crank handle at one end. Inside the cable is a corkscrew tip. The more the wire is cranked, the more it will push through the pipe and break up the clog.
To use a drain snake, you must first disassemble the P-trap. Next, fill the bucket with hot water and a little dish soap. You should pour enough water to be comparable to a cup of hot coffee. After pouring the water down, wait a few minutes to see if the clog is gone. If it has, try using a drain snake to clear a toilet blockage when a plunger hasn’t worked.
Another useful tool for clearing toilet blockages is a drain snake. The drain snake is a long metal cable with a corkscrew-like tip that can be fed into the drain pipe until it meets the clog. Its design allows the user to keep debris at arm’s length while still allowing it to hook foreign objects.
A drain snake is the last resort for clearing a toilet blockage when the plunger is not working. In the past, a drain snake was a useful tool for removing a clog in a toilet, but it is no longer widely available. You can also use household items like straightened wire to make your own plumbing snake. To use a drain snake, make sure to follow the directions on the package.
Using a plunger
How to unclog a toilet without a plunger? You can use liquid soap, which you can find in your kitchen and bathroom. Squeeze the soap into the hole in the toilet bowl and slowly push it in. Alternatively, you can pour hot water into the toilet bowl to lubricate the clog. But remember to wear rubber gloves and goggles to prevent splashing.
First, find the water valve. It is normally located behind the toilet, toward the bottom. Plungers should be held with downward pressure, as letting off the pressure can damage the rubber seal. To avoid this, try to flush the toilet using a sink or shower full of water to cover the plunger. This will force out the clog. But it’s not effective if the water valve is too high.
If you don’t have a plunger, you can try leaving the toilet alone for a few hours or even overnight. The clog may disintegrate in the water. This may be true if it’s made of large pieces of poop or too much toilet paper. After a few hours or overnight, you can try flushing the toilet again.
Alternatively, you can try using household bleach. This product breaks down waste and makes it easier for the toilet to flush. Follow the same process as with dish soap, but instead of using dish detergent, use two to three cups of household bleach. Wait ten to fifteen minutes and flush the toilet. If the solution doesn’t work, you can try using hot and soapy water instead.
Another option is to call a plumber. The plumber will be able to provide you with the proper instructions to turn off the water supply. If a plunger doesn’t work, it’s best to hire a plumber. Often times, a plunger doesn’t work, but a plumber will be able to help you clear the toilet. If you can’t use a plunger, you can use dish soap instead. This will break down residue and also act as a lubricant.
Another option for unclogging a toilet when a plunger doesn’t work is to use a wet/dry vacuum. A wet/dry vacuum costs about $80. It has better suction than a normal plunger, so you should invest in a heavy-duty vacuum if you have it. Just make sure to wear rubber gloves before using it!
A plumber’s auger will reach the very bottom of the drain. A snake is especially useful if the clog is made of solid material. Its rubber coating will protect the porcelain from scratches. Wear rubber gloves and push down the snake until it encounters resistance. Once you feel resistance, you can turn the handle clockwise and push the obstruction further down the drain. Make sure to watch the snake for free movement so you can know whether the auger is working.
Using a plumber
If you’re having trouble using a plunger to unclog a toilet, try this simple trick. Using half a cup of dish soap and hot water to unclog a toilet is a good way to loosen the clog. The dish soap makes the pipes slick, which can help push the clogged material down into the sewer main. Once the water flows out, try using a plunger or drain cleaner to clear the blockage.
If the problem is with a larger sewer line, a plumber can use a camera to examine the problem. Another common problem is hard water that calcifies inside drain pipes and leads to toilet clogs over time. A plumber can flush the system and install a water softener to prevent the problem from occurring again. After a plunger doesn’t work, a professional plumber can perform a camera inspection to locate the clog and clear it from your toilet.
A plumber can use a cable-like device called an auger to unclog a toilet without damaging the plumbing. A plunger is only effective when the water level is over 50%. If the water level is above this point, you may need to scoop some of the water out. You may also need to add baking soda to the toilet bowl if the clog is really severe.
If a plunger doesn’t work, a combination of hot water and dish soap is a great solution for a clogged toilet. This solution works well if the bowl isn’t too full. This method should be done before a plumber arrives. For safety reasons, it’s best to use rubber gloves to avoid any unnecessary injury.
A plumbing snake can be used to unclog a toilet when putting a plunger in it doesn’t work. The plunger should be used slowly and carefully. After using it a few times, the water should be able to drain from the trapway. The plumber will charge extra for floating objects in the water. These types of plumbers are highly qualified and experienced to handle the problem.
In addition to the plunger, you can also try the baking soda and vinegar solution. The two substances will react with the water and cause bubbles, which will clear the toilet. The mixture should be poured slowly into the toilet, making sure to pour it carefully so that you don’t overflow it. If the mixture doesn’t work, the next best option is to call a plumber.
