We research in-depth and provide unbiased reviews and recommendations on the best products. We strive to give you the most accurate information. If you buy something through our links, we may earn a commission.
A blunt blade can produce clean, splinter-free cuts with no fine edges. If you notice that you are making burn marks with your table saw, it is time to sharpen it. A sharp blade is able to cut through all types of wood stock without the risk of creating a burn mark. To sharpen table saw blades, follow these steps:
Can be done by hand
Before resharpening the table saw blade, you should make sure to clean it properly. For the best results, use a soft brush and concentrate on the gullets and tooth edges. Rinse the blade thoroughly with clean water. Avoid using water that is too hot as this can ruin the material of the blade. Dry it with a paper towel or cloth. Although table saw blade resharpening is not an easy process, you can do it yourself if you’re willing to invest the time.
You can use a diamond stone to sharpen the blade. The main advantage of using a diamond stone to sharpen the blade is that it doesn’t leave a rough edge or chip. The sharp edge will last for a long time because the stone is extremely durable. In addition, it can also make the tooth of the blade perfect. It’s possible to sharpen the table saw blade by hand, but this process is more time-consuming.
Once you’ve cut the wood to test the blade, take a close look at both blades. Notice any differences between them. The primary blade will have slightly more teeth than the backup. Replace the primary blade and check the new sharp blade to ensure it’s as sharp as the primary. Make sure the teeth are all aligned evenly and this will ensure a clean sawing result. The foxtail saw was a handy tool for the carpenter for many years. Nowadays, foxtail saws are made of plastic handles and hardened Teflon-coated saw blades.
If you’re looking to learn how to sharpen table saw blades, you can also purchase a table saw sharpening jig that allows the blade to slide back and forth on the grinding wheel. This method is easy to do but it requires practice and patience. Make sure to wear gloves, safety goggles, and earphones. Lastly, wear protective gear as this process can be messy. A pair of eye protection and gloves are required when sharpening a table saw blade by hand.
To sharpen a table saw blade properly, you must first determine which direction the chamfer faces. Make sure to remove excess carbide before sharpening. Double sharpening will damage the tooth surface and will require a new blade. Alternatively, you can have a professional sharpener sharpen your table saw blade for a fee. Depending on the size of the table saw blade and the material of your blade, you can expect to spend a few dollars for a table saw blade sharpening service.
With a Chicago Electric Blade Sharpener
To ensure you’re getting the most out of your table saw, you should learn how to sharpen table saw blades. Blades are made of steel and have carbide teeth that stay sharper longer. But you have to sharpen them correctly to maximize their efficiency. This involves using strong abrasives, which usually include diamond bits. Blade sharpening should be done properly, or it can make cutting difficult and may even result in a blade that breaks.
The first step in sharpening table saw blades is to learn about the geometry of the blade. Many models come with a small extension rod, while others use a table surface. This added support keeps the blade in place. There are two types of disks that grind against the saw tooth blade. Diamond wheels are good for coarse material removal, and Emory wheels produce finer edges.
The Chicago Electric Blade Sharpener is an inexpensive way to sharpen your table saw blades. The device runs about $50 and is available at hardware stores such as Harbor Freight. However, it’s still advisable to send your blades to a professional for sharpening. The machinery used by a professional is extremely precise, and you’ll be confident that you’re getting a perfect result.
If you’re unsure of how to sharpen table saw blades, you can watch a review on YouTube to find out what people say about this device. Its die-cast aluminum base and tilting arm enable it to sharpen several blades at once. The mechanism is also very convenient and offers some great features for woodworkers without having to spend a fortune.
A Chicago Electric Blade Sharpener will not be effective for a crappy circular saw blade. Regardless of its quality, you need to follow the directions carefully to avoid damaging the blade. The blade switch must be in the proper position and a nut must be tightened. It’s a good idea to mark the teeth of the diamond blade so that you know if it’s a proper fit for the machine.
With a diamond-encrusted abrasive material
Before you start sharpening your table saw blades with diamond abrasive material, you need to know how to use it properly. Make sure that you have a circular blade to work with, and that you place the blade against the diamond blade. You should then rub the blade against the diamond blade to sharpen the inside of its teeth. Repeat this process several times, and your blade will be sharp and efficient.
You can use a jig to keep the blade stable while sharpening it. A jig can be easily replaced with a solid material to support the blade while sharpening it. The jig can be used to sharpen table saw blades of different materials, including carbide. The jig is not required, but it can add a layer of stability to the sharpening process.
The diamond-encrusted abrasives used for sharpening table saw blades can be purchased at hardware stores and online. The company Exchange-A-Blade makes a range of power tool accessories, including diamond-encrusted abrasive materials. These products are remanufactured to ensure that they’re as effective as new.
Before you start sharpening your table saw blades, be sure to identify what material your blades are made of. A diamond blade can be more durable than a stainless steel one, so it may be necessary to invest in more than one. Fortunately, diamond-encrusted abrasive materials are relatively inexpensive. But be sure that you use the right abrasive material. The right material will ensure a smooth cut on your wood.
The right angle for diamond-encrusted abrasives depends on their content. The larger the diamond, the finer the chip particle. Diamond saw blades are generally good for cutting hard and durable materials, while the coarser ones are better suited for cutting soft materials. Regardless of which one you choose, make sure you sharpen the blade properly and use it correctly.
Generally, you should start by sharpening the blade on a damp surface. This will keep the knife cool and prevent the blade from breaking. A damp surface is also better for cutting stone, pipes, fiberglass, and other thin materials. If you need to cut a piece of wood without a pilot hole, use a dry leaf instead. A thin blade will track through the cutout.
With a chainsaw
For maximum performance, it is imperative to regularly clean your blades. Resin buildup and excessive grease reduce blade life, which you want to keep to a minimum. The best way to clean your blades is to use a suitable degreaser and wipe them dry afterward. This process will remove large areas of dirt, grease, dust, and wood chippings. It will take you a few minutes, but the end result will be a sharp, efficient blade that will cut through anything you put in its path.
To sharpen a table saw blade, place it in a vice. Place the file in the gullet of the sawtooth closest to the heel. While filing, apply gentle pressure and glide the file across the blade. Make sure the tooth is flat to the right. If it is not, you should use a filer that has a softer tooth and use it to file it.
Before using a chainsaw to sharpen a table saw blade, you must prepare a work area. You will need a tarp or newspaper, a chainsaw with diamond grind attachment, a Dremel tool, and lubricant oil for the chainsaw. Ensure that you wear protective gear such as safety goggles and a pair of substantial work gloves. Lastly, you will need a place where you can keep the blade sharpened.
Before you begin the process of sharpening table saw blades with a chainsaw, be sure to secure the blade into the vice. Afterwards, you can sharpen the blades by applying the sharpening compound in the gap between the saw teeth. Crank sharpeners, on the other hand, are usually used to sharpen chainsaw blades and are convenient for home use.
If you aren’t comfortable using a chainsaw, it is also possible to use pliers to cut off the tooth edges of the saw. However, these pliers could harm the fine saw teeth. Instead, use a triangular file and apply light pressure. Remember to file the teeth evenly. A triangular file will sharpen table saw blades and other saws.