How to Plunge a Toilet

We research in-depth and provide unbiased reviews and recommendations on the best products. We strive to give you the most accurate information. If you buy something through our links, we may earn a commission.

It’s no fun to have a clogged toilet, but having an overflowing toilet is even worse. Luckily, unclogging a toilet is a simple process and using a plunger is one of the easiest ways to do it. While the plunger is probably the easiest tool for the job, many people are still unsure of how to use it effectively. Read on to learn how to plunge a toilet successfully.

Keeping enough water in the toilet bowl

When you are trying to unclog your toilet, one of the first things you will want to do is run as much water as possible into the toilet bowl. It will be much easier to plunge a toilet if the water is above the plunger. However, this method is not as effective if you try to force air through the trap. If you use this technique, you will likely only kill the pressure that you need to unclog the toilet. Using an alternative tool, such as a toilet snake, will be more effective than plunging.

When you have used the plunger to remove excess water, you may find that some of the water is still in the bowl or tank. If this happens, you can either stop the water level or drain it yourself. One way to do this is to remove the water line from the overflow tube. If you can’t reach the overflow tube, you can use a cup or small bowl. If you don’t have one of these items, you can also use the cap of a hair spray bottle or a cap of paint.

Remember that if you are using a plunger, the bell of the toilet will be full of air at first. So, try to plunge as gently as possible to avoid creating a vacuum inside the seal. If you are using too much force, the seal will break and the water will come out of the bowl. And don’t give up if it doesn’t work the first time. You can always try again after a while.

If you don’t want to use a plunger, you can also try using hot water to clean the toilet. A gallon of hot water can help. However, make sure that the water doesn’t boil. If you do, it could cause the bowl to crack and the water to drip down the drain. If all else fails, you should try other methods first. You may be surprised at the results.

Using a flat plunger

You can use a flat plunger to unclog a bathtub drain, too. To use one, insert it at a 45 or 90 degree angle and push down until you have cleared the clog. Rinse it out in the shower or under the sink faucet before storing it away. Plungers work by using the force of the water to push down the obstruction. It is best to use a flat plunger when it has a large hole, as they’re more powerful than ordinary plungers.

To use a flat plunger to unclog a toilet, make sure the surface of the plunger matches the surface of the drain. The flat surface is necessary because it allows the plunger to seal properly and create enough suction. To prevent air from escaping, fill the plunger cup with water. Then, push down and pull up forcefully until you get the desired effect. This process can take up to 20 seconds. When you are finished, you should hear the click of the plunger.

A flat plunger works by utilizing the principle of Boyle’s law. When the plunger is sealed over the drain opening, the pressure it creates in the pipe pushes water downward. By pulling up, this pressure is reduced, allowing water to rise. This sloshing motion will dislodge the most stubborn clog. If the water is warm, the rubber seal will soften, allowing it to be easily purged.

To use a flat plunger to plunge a clogged toilet, make sure the flapper valve on the toilet is down. This valve is located on the wall behind the toilet. Make sure the water level is halfway up the brim of the toilet before plunging. You can also flush the toilet to maintain the water level in the tank. Once you have plunged the toilet, it will no longer be clogged.

One more type of toilet plunger is a flange plunger. These have a rubber cup attached to a wooden handle. These plungers are more powerful and easier to use, but they also require a bit more effort. The flanges on a flange plunger create a more effective suction, but they can scratch the surface of the toilet. If you’re unsure of which plunger to use, try petroleum jelly to make a seal.

Using a chemical drain-clearing solution

While you can use a chemical drain-clearing solution when you’re stuck plunging a toilet, it’s not recommended. Chemical drain-clearing solutions contain chemicals that can leave behind corrosive water. It’s also important to wear gloves and safety goggles when working with them. You should also keep the toilet cover down to avoid falling toys and hairbrushes.

A natural drain-clearing solution can be made by combining two parts vinegar and one part baking soda. The solution should be allowed to sit overnight. Then, you can use a plunger to break the clog. When using a chemical drain-clearing solution, make sure you read the label carefully and follow all directions. Besides, wearing rubber gloves and a face mask is always a good idea, especially when using any chemical drain-clearing solution.

Some brands of drain-clearing solutions are safe for your plumbing, but you should also read labels carefully. While many drain-clearing solutions work on grease and hair clogs, they can cause odors. This makes it a good option if the clog is not too severe. Some drain-clearing solutions are acidic or caustic, and you should always follow the manufacturer’s directions before using the product.

If a chemical drain-clearing solution doesn’t work, call a plumber. Chemical cleaners are temporary fixes and should only be used if the drain is partially blocked. If you’re looking for a long-lasting solution, you should consider using a natural drain-clearing solution. It will save you the cost of a plumber and prevent the need for a home plumbing repair.

If you’ve tried a chemical drain-clearing solution but still haven’t been able to clear the drain, you may want to consider using a natural one. The chemical drain-clearing solutions will help you eliminate clogged toilets, but they may not be safe for your plumbing. If you have a toilet that’s clogged with hardening compounds, consider using a bidet instead. Not only does this offer you a hygienic alternative to a toilet plunger, it also uses less toilet paper than the chemical drain-clearing solutions.

The chemicals in chemical drain-clearing solutions are known to be toxic, and their fumes can cause respiratory problems, skin burn, and even vision loss. In some cases, the chemical drain-clearing solution can cause blindness, so make sure to wear gloves and eye protection. Despite the fact that these solutions may seem convenient, they are not always the best option. If you want to use a chemical drain-clearing solution to plunge a toilet, you should consult a professional before taking any action.

Using a toilet auger

A toilet auger is an inexpensive way to get rid of a clog. This tool has a cable that should be pushed through the toilet trap. When the cable reaches full extension, rotate the handle a few times to force it through the clog. Once the tip of the auger is snug against the toilet tube, remove the auger. If the auger is stuck, it can crack.

The handle pipe of the auger should face the direction of the drain and the pipe should be 4 to 6 inches from the end of the drain. Once the handle pipe is inserted into the toilet, turn the auger counter-clockwise until it comes out of the drain. Repeat as needed until the drain is clear. Once the drain is clear, the toilet is ready for flushing again. Make sure to rinse the toilet bowl thoroughly with clean water after using the auger.

To use a toilet auger, first set up the auger by placing the curved end against the drain. Make sure that the cable is taut before you use it. You should also be able to use the auger if you’re not sure what to do. First, make sure you have enough slack on the cable. Then, turn the handle clockwise until it comes out of the toilet.

A toilet auger is a great tool to keep around for any clogs that you might run into. Using a toilet auger is so simple that most plumbers reach for one after the first attempt. The auger is available in different styles and sizes, but most augers feature a handle that cranks the wire into the drain. Once in position, it will help remove the clog and get the water flowing again.

Why trust Handyman.Guide?

s written by Itamar Ben-Dor, who has 25 years of experience in renovations, carpentry, locks, creation, landscaping, painting, furniture construction, and furniture renovation, works with concrete, plumbing, door repair, and more.

Itamar Ben-Dor has been in the home improvement business for over 25 years. Itamar Ben-Dor is a jack of all trades. He's worked in the renovation field for years, doing everything from locksmithing to carpentry. He's a small repairs specialist. But his true passion lies in furniture construction and renovation - he loves seeing old pieces come back to life with some new woodwork or a fresh coat of paint.

He has taken courses on many topics in these fields at professional colleges in Israel. Over the years, Itamar has also become quite skilled in gardening, carpentry, and renovations. He's worked on projects of all sizes, from massive renovations to small repairs. No job is too big or too small for him!


Disclosure: handyman.guide participates in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for publishers to earn fees by linking to Amazon.com and affiliated sites.

HandyMan.Guide
Logo