How to Make Shaker Boxes Using Basic Woodworking Tools

We research in-depth and provide unbiased reviews and recommendations on the best products. We strive to give you the most accurate information. If you buy something through our links, we may earn a commission.

If you’re looking for a DIY project for the kids, you’ve come to the right place. I’m going to show you how to make shaker boxes using basic woodworking tools. Here are the Materials, Techniques and Tools you’ll need. As always, we’ll also cover the Cost! And if you’re not sure where to start, here’s a basic overview. This article will get you started in making your own wooden boxes in no time!

Materials

In the early 19th century, the Shaker community produced functional objects, including wooden shaker boxes. These oval boxes nest inside larger ones when empty, and were made by bending wooden slats and using copper tacks to secure them. Wood is heated over 180 degrees Fahrenheit and shaped by bending the wood into a box shape. The top and bottom boards are then cut and fastened using wooden pegs.

Shaker boxes are most often made of maple or quarter-sawn pine, but there are also authentic versions made from other kinds of lumber. In Maine and New Hampshire, maple boxes are typically more durable than those made from other woods. In general, however, you should consider a mix of maple and pine for your boxes. Once you’ve determined what kind of wood you want to use, you can purchase the tools you need.

To make shaker boxes, you’ll need to purchase various materials. Veneer can be purchased in a veneer kit, which comes with materials. For shaker boxes, the veneer should be one-eighth inch thick, while smaller boxes require five-sixths-inch thick veneer. Alternatively, you can saw thicker boards yourself, if you don’t mind a little extra work. Remember that a band saw works best for this task.

You’ll also need some prep work, and this is where the fun begins. First, you’ll need to cut the finger pattern to match the desired size of the box. Make sure that your cut is a slight bevel and you don’t cut the fingerbox to fit perfectly. Next, drill a 1/16″ pilot hole and sand it to a half-thickness. This step is crucial for the fingers as they will bend and conform to the curved surface. Using a belt sander will help you feather the edges of the finger box, and will help it bend more easily.

Techniques

Whether you’re looking for an elegant wooden box for an anniversary, wedding gift, or just to keep your jewelry organized, you can learn a few basic techniques for making a Shaker-style box. Several popular woodworking magazines have tutorials that teach you how to make your own Shaker boxes, and Andrew Zoellner has shared his tips with woodworkers worldwide. Read on to learn more about these techniques and start making your own beautiful boxes.

First, you’ll need to copy the pattern to make a form and shapers. If you’re planning to make more than one set, make several copies. Depending on the size of your box, you might need to cut multiple pieces of stock. For smaller boxes, use a 2X6 non-resinous wood. For larger shakers, use 3/4″ stock. Poplar and basswood work well, while Douglas Fir may release sticky resin into the oven.

Woodworking techniques vary from box to box, but a Shaker style can be made out of four basic materials. You’ll need thin (1/4″-thick) stock for the top and bottom, copper tacks, and hardwood pegs. You can purchase wood veneer or cut your own from scratch. Then, simply use the same tools to make the wood pieces and veneers. For the core and sides, you’ll need to use a band saw.

Read More:   How to Tension a Bandsaw Blade

Another technique for making Shaker boxes is to bend thin straight-grain hardwood bands around a form. After they’re soaked, the ends are tacked together. After the bands have dried, you can attach panels to the top and bottom. It’s as simple as that! It’s a fun way to create a decorative box, and you’ll be proud to display it on a shelf.

Tools

To build a shaker box, you need a few tools. These include a band saw, veneer, a cabinet scraper, and a sander. You can also buy ready-made wood or veneer and use the same tools. To smooth shop-made veneer, you can use a drum sander. A steel tack will also work, but it’s too hard to clinch and will stain the wood.

The simplest Shaker box is an oval shape. This box is graceful and functional. The wood used to make one is specially prepared cherry, quarter cut stock for the box tops, and copper fasteners. Oval box kits come with everything you need to build one. They come with full-sized patterns and all the tools you’ll need. The patterns include instructions for making the bending forms and the box itself. They also come with directions for shaping the fingers.

The first step is to measure the thickness of the band. The band thickness is important, since it affects the ease of bending and success of completing the project. Thinner wood is easier to bend than thicker wood. Regardless of thickness, the visual appearance of the box will vary, and box makers understand this. They need two lengths of copper tacks to make the bands of different thicknesses. In order to make a shaker box of varying thickness, the inside end of the box must be feathered by 2″ to blend with the rest of the box’s interior.

One of the tools you’ll need to create a Shaker box is a sander. This handy tool will make your job much easier. Unlike a table saw, a sander can cut the wood into various shapes. For smaller boxes, you can use a 2X6 piece of non-resinous wood. Poplar and basswood are both good choices. Douglas Fir may contain sticky resin that may leak out when the wood dries.

Cost

In this class you will learn how to make a set of four nesting Shaker boxes. In the Shaker tradition, these wooden boxes are symmetrical and graceful. You will learn how to assemble the boxes using traditional Shaker techniques, including bending, drying, and shaping. The class will be held at Stonewall Farm, a local farmer’s market, where the price includes all supplies and tools. You will also learn how to apply a rich, durable finish to your Shaker boxes.

To make shaker boxes, you’ll need specialized tools. A water tray helps soak the bands while the anvil hammers them together to create the box’s sides. You can also buy shaker box making supplies from a store like W.W. Cross Nail Co. in Charlotte, MI. These materials are inexpensive, but you will need to purchase several sets. Each batch will cost between $10 and $20, so be prepared to purchase a few different kinds of materials.

If you’ve decided to learn how to make these boxes, the process will likely cost a bit more. But the rewards will be worth it. A Shaker box is both functional and beautiful. The oval shape was once used for sewing notions and seeds. Making one yourself will save you money, and you’ll have an item to treasure for years. It’s not hard to create one, either. Straight-grain hardwood bands are soaked in hot water, bent around a form, and tacked together. The form is then allowed to dry. Pete Baxter shares his secrets of creating an oval box in this video.

Read More:   How to Put a Lock on a Wood Box

When making your own shaker boxes, you’ll find several places where you can buy the necessary materials. The price of the shaker box varies by material. It may cost as little as $16 per shaker box, or as much as $30 for a full kitchen. The cost of shaker cabinets varies widely, mainly due to the cost of materials and labor. Shaker cabinets are cheaper than raised panel cabinets, because of the growing popularity of RTA furniture.

Eco-friendliness

The green-friendly approach is increasingly becoming popular for packaging products. Shaker boxes, for example, can be made out of recycled toilet paper rolls. Toilet paper rolls are biodegradable and recyclable, and often contain green fillers such as wheatgrass or safflower. These boxes can also be used as a unique decoration, such as with patriotic themes. With a few simple materials, you can create a stylish shaker box at home, or even create a personalized one for your customers.

Subscription boxes are a growing business model, and the joy of receiving a carefully curated box each month is a powerful draw. But as climate change and other issues make sustainability an even more urgent concern, subscription boxes are getting the sustainability treatment. And for good reason! The joy of receiving a box full of new products is just too good to pass up! Subscribe to a sustainable box that supports your favorite nonprofits.

Subscription boxes are a great way to raise awareness of sustainability issues and promote sustainable products. These boxes can cater to individual tastes and needs, while highlighting sustainable products. Subscription boxes are also an excellent way to get the name and face of a sustainable brand. While you can easily find a generic keep cup at your local Target, a subscription box is a better option for the planet and for the environment.

Why trust Handyman.Guide?

s written by Itamar Ben-Dor, who has 25 years of experience in renovations, carpentry, locks, creation, landscaping, painting, furniture construction, and furniture renovation, works with concrete, plumbing, door repair, and more.

Itamar Ben-Dor has been in the home improvement business for over 25 years. Itamar Ben-Dor is a jack of all trades. He's worked in the renovation field for years, doing everything from locksmithing to carpentry. He's a small repairs specialist. But his true passion lies in furniture construction and renovation - he loves seeing old pieces come back to life with some new woodwork or a fresh coat of paint.

He has taken courses on many topics in these fields at professional colleges in Israel. Over the years, Itamar has also become quite skilled in gardening, carpentry, and renovations. He's worked on projects of all sizes, from massive renovations to small repairs. No job is too big or too small for him!


Disclosure: handyman.guide participates in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for publishers to earn fees by linking to Amazon.com and affiliated sites.

HandyMan.Guide
Logo