We research in-depth and provide unbiased reviews and recommendations on the best products. We strive to give you the most accurate information. If you buy something through our links, we may earn a commission.
Learning how to change circular saw blades is a key skill to acquire. The process of changing a circular saw blade is a simple one. All that’s needed is a few simple tools. The first step is to disconnect the power cord from your saw. If you have a cordless model, you can remove the battery. Choose the correct blade size for your saw. After determining the proper size, remove the blade guard to expose the blade. Engage the arbor lock.
The next step is to ensure that the circular saw blade is tightened into place. Make sure the blade is properly seated on the saw. Then, turn on the power source and check the blade’s orientation. Most circular-saws have engraved arrow marks on the blade. Ensure that the teeth are facing the front side of the wood. Once the saw is turned on, the blade is ready to use.
Next, remove the old circular saw blade. Once it has come out, remove the old blade. The blade may still be attached to the saw by the bolt, but the saw should no longer function. To make the change, simply screw in a new circular-saw-brand blade. Then, attach the new blade. If you’re unsure of how to change the circular-saw-blade, you can visit a specialist shop to get it done.
You’ll also need a saw wrench. A blade wrench is essential for changing the blade on a circular saw. The tool’s locking mechanism should be unlocked and the blade should not wobble while you’re changing the blade. If you have a battery-powered model, the wrench should be easy to reach in the battery compartment. If you have the correct tools, the circular saw is safe to use. So, if you want to learn how to change circular-saw-blades, here’s what you need to know.
To start, you should first remove the blade. The blade bolt should be finger-tight. If the bolt is not tight enough, you can use a wrench to tighten it 1/8 turn. When you’ve completed the procedure, you can now plug in the saw and begin cutting. However, be sure to wear protective gear, especially gloves, while changing the circular saw blade. The contact between the blade and the skin should never be direct.
To change a circular saw blade, you’ll need to unplug the cord and remove the battery. Once you’ve done this, make sure you read the instruction manual. Many models have a guide that will help you with the process. If you’re unsure, refer to the instructions provided in the manual to replace the blade. When replacing the blade, be sure to turn off the power before you begin.
You’ll also need a wrench and a new blade. Then, you can install the new blade in your circular saw. To avoid the risk of injury, be sure to unplug the power cord before you begin the process. Once the saw has been disconnected from the wall, you’ll need to remove the blade guard and remove the safety lock. After that, you’ll need to place it on a safe surface.
After you’ve removed the blade guard, you’ll need to engage the safety lock on your circular saw. Once you’ve engaged the safety lock, you can remove the blade guard. Be sure to place the saw on a sturdy surface to protect it from accidents. Once you’ve removed the blade guard, disengage the safety lock and reconnect the blade to the saw. After you’ve finished, you’re ready to start chopping.
Before removing the blade guard, disconnect the saw from the power source. This will allow you to remove the blade. Using the blade guard is essential for preventing accidents. If you accidentally disconnect the power supply, you risk damaging your saw. The best way to disconnect your circular saw is to use the battery compartment to store the blades. Afterwards, turn it off. If it is still connected to the power source, it’s time to reposition the blade.