We research in-depth and provide unbiased reviews and recommendations on the best products. We strive to give you the most accurate information. If you buy something through our links, we may earn a commission.
To calculate how thick a piece of veneer is, divide the width by the length. If the veneer piece is six inches wide, and three feet long, the answer would be 6 x 36, or 216 divided by 144, or 1.5. The veneer thickness is then one-half inch thick, or one-half square foot. Similarly, a three-foot-wide veneer piece would be six inches wide by three feet long, or one-half square foot.
AK/Apple
If you are considering purchasing a slab of Apple/AK veneer for your project, you may be wondering how thick it should be. In short, the thickness should be approximately the same as that of other types of wood veneer, but you should also keep in mind that different veneers may have different thicknesses. The thickness of veneer is generally determined by the cut of the wood substrate. A wood substrate with a backsawn appearance is more susceptible to cupping than one with a quarter-sawn surface.
ApplePly veneer is the highest quality wood panel available in the United States. It is composed of birch and Alder veneers laminated together in a two-step lamination process. ApplePly veneer is a versatile and attractive choice that machines beautifully and has a high strength-to-weight ratio. The veneer is commonly used in architectural interiors, contemporary furniture, and retail fixtures. AK/Apple Veneers are available in a variety of thicknesses, depending on the size of the project.
A hardwood plywood made of AK and Apple/AK veneer can vary in thickness. Generally, a plywood of this thickness has a veneer core made of edge-glued strips of wood. This core has excellent strength and screw-holding capabilities. Appleply and Baltic Birch are top-quality veneer core plywoods. Choose one that has a 1/16-inch or an 8-inch core. The raw edge of the veneer is attractive when finished, so it can often be used as a design element.
Decospan
When it comes to paneling and cladding, Decospan offers a variety of thickness options, from thin and lightweight to heavy and dense. They deliver veneers in six different quality levels, each with its own unique characteristics. Decospan’s most high-end veneers are Architectural/A+, which is a premium grade for special projects. Other options include Classic/A, which is a high-quality wood with small wood characteristics, and Commercial/B+, which is a mid-quality panel. Finally, the veneer is available in a variety of styles, and the back is made of natural wood.
The Decospan group has continually invested in research to improve their products. For example, they have patented a mixing machine for customised colour combinations and a process that randomly pairs strips of veneer that are one hundred percent similar. Another innovation is their development of a wide-panel product that is 2070mm thick. The results of this method make Decospan the choice of professional designers and decorators alike.
The Decospan brand has been in business for three generations. Today, the company has eight manufacturing plants in Europe and employs around 700 people. Decospan’s Querkus veneer is a sustainable option that combines the authenticity of natural materials with engineered stability. This veneer material reflects Decospan’s rich history and conservation values. The company sources oak from controlled-growth zones in Croatia and Europe, and uses only the most sustainable methods.
Decospan offers a VENEER BIBLE that includes A4-size samples of each wood species available. The VENEER BIBLE also has a photo gallery to provide you with a better idea of the wood species and thicknesses available. Choosing the right veneer thickness is crucial for the look and feel of your project. For example, the veneer made from oak is typically two and a half inches thick.
AK/Bamboo
AK/Bamboo veneer is made from strips of peeled bamboo. This hardwood has a warm coffee-brown color, a loose to dense grain pattern, and a stringy, coarse texture. Because bamboo is a fast-growing grass, it accepts finishes and stains well. It is recommended to apply a clear coat to achieve a smooth finish. A good way to determine how thick an AK/Bamboo veneer board should be is to measure its thickness.
The thickness of AK/Bamboo veneer varies by species. Moso bamboo veneers have greater culm wall thickness and are obtained by rotary-cutting the material. This type of bamboo is a lignocellulosic material with low thermal stability, dimensional instability, and biological degradation. The process of thermal modification has received increased attention as a means of increasing the stability of bamboo veneers. Heat treatments can be carried out at temperatures ranging from 150 to 260 degrees Celsius.
Bamboo veneers can range from very thin to very thick, depending on the thickness of the wood. In general, AK/Bamboo veneers are less than 0.6 mm thick. They are thinner than their wood-based counterparts, but they can still be used for decorative purposes. Some of them are attached to paper reinforcement backings for additional strength. This material can also be used for decorative veneering applications.
There are currently no international standards for bamboo products, but a few countries are working to develop them. As of yet, only three countries have published national or industrial standards for bamboo products. In addition, several countries, such as China, India, and Colombia, are developing bamboo industries. Various other countries, such as the United States, are developing their own quality and fabrication standards. However, this is far from sufficient to address the global bamboo market.
AK/Plywood
AK/Plywood marine plywood is a variety of products with a variety of uses. Made from tough face and core veneers, marine plywood is resistant to delamination and fungal attack. It also features an imported Gurjan Face Vener for superior strength and stability. These products are sold in different brands. If you’re looking for marine plywood, here’s what you need to know. You can find these products at any major home improvement center.
Apply the veneer panel to the plywood using a cold or hot press and a white glue with low filler content. Make sure to use a high solids contact cement. Avoid using water-base finishes and use a vacuum before applying the veneer. Then, remove the plastic before applying the glue to the veneer panel. If the veneer is loose or comes off easily, the glue application method may not be effective. A pinch roller is an effective tool to press the veneer into the substrate.
AK Group has been manufacturing plywood and allied products for over 20 years. They have recently received a recognition award for their industry leadership. The award was presented to AK Plywoods by the KS Hegde Institute of Management, NITTE, and Karnataka Bank. AK Plywoods is an excellent choice for the woodworking industry, as it conforms to both BIS and IFC standards.
When comparing plywood and AK/Plywood veneer, you’ll notice that AK/Plywood is typically more expensive than a similar grade of laminate. The difference is the quality and thickness of the veneer. Plywood is made from several layers of veneer, but it’s easier to work with than a solid surface. A quality plywood product should also be able to resist expansion and contraction. Poor quality plywood is more prone to peeling and splitting, so be careful when buying it.
Formica
You might be wondering how thick is Formica veneer, but how do you figure out which thickness to order? You can find the answer to that question by visiting Wilson Art’s website. The basic size of VT thickness is 48″ x 96″ or four feet by eight feet. For gloss Formica, you can choose from 48″ x 120″, but you must order the gloss laminate with peel coat. You should also know that STD thickness mica is not always in stock at your local distributor.
