How Do You Unplug a Toilet?

We research in-depth and provide unbiased reviews and recommendations on the best products. We strive to give you the most accurate information. If you buy something through our links, we may earn a commission.

If you are wondering how to unplug a toilet, read this article. You’ll learn about the steps to follow and the best tools to use. Here are a few suggestions:

Steps to unplug a toilet

How do you unplug a toilet without breaking it? You’re not the only one. You might also need to turn off the water supply to prevent overflow, but it’s easy enough to do yourself. Follow these steps to unplug a toilet safely. Once you’ve completed these steps, you’ll be ready to call a plumber or other plumbing service to help you unclog the toilet.

The first step is to locate the auger housing. This will help you make sure you’ve placed the auger into the toilet’s trap, which is located just below the bowl. Most clogs occur here. To avoid causing further damage, use a single hand to push the auger housing into the toilet trap. Slowly crank the auger to avoid damaging the toilet. It’s also a good idea to unplug the toilet in the morning or early in the morning to avoid the risk of waking someone who is snoring.

Another way to clear a toilet is to use a wire coat hanger. Wrap the wire with a cloth or duct tape to avoid scratching the toilet bowl. Push it down the toilet pipe by using the hanger. It’s best to push the hanger in a circular motion so you feel the obstruction. If you feel a lump in the pipe, the wire hanger is not the obstruction.

The next step involves attempting to unclog the toilet using liquid soap. Most liquid soaps come in different sizes, and you’ll need the one that fits into the hole. Make sure you squeeze the soap gently, as using too much can damage the pipe. You can use hot water to lubricate the clog. Once you’ve completed these steps, you can switch on the water supply near the floor to prevent overflow.

Using a wet/dry vacuum to unplug a toilet

If your toilet is plugged and the water is no longer running, you can try using a wet/dry vacuum to unclog it. This tool is perfect for unplugging toilets, especially if you have one on hand. The first thing you should do is turn the wet/dry vacuum on liquid and then place the hose into the toilet bowl or tank.

The hose of a wet/dry vacuum can be wrapped around an old towel and placed inside the drainpipe. Use the vacuum for a minute or two to unclog the toilet. If the water drains and you can’t clear the clog with the wet/dry vacuum, use a commercial drain cleaner. These are readily available at home improvement stores and grocery stores.

To use a wet/dry vacuum, prepare the area around the toilet bowl. Remove rugs, towels, and other materials that could get in the way. Be aware that the nozzle of the wet/dry vacuum will get wet, so place it in the bathtub after you’re finished using it. Wrap the nozzle with a damp cloth after use to help with suction around the toilet bowl.

For stubborn clogs in the toilet, a wet/dry vacuum can be a good option. The device will reach down into the drain and suck the clog out of the toilet bowl. You should set the vacuum’s suction to the highest setting for maximum results. Afterward, you can return the toilet to its original position. A wet/dry vacuum will drain the water from the bowl, but it can be messy, and you may want to remove the toilet first.

Read More:   How to Remove Candle Wax From Carpet

Another option is using cling wrap to replicate the action of a plunger. Just make sure that you use enough cling wrap to completely cover the toilet bowl. It’s much safer than using a plunger and is effective in certain circumstances. This method is safer than using a plunger because cling wrap will not damage the bowl. This method is also less invasive than using a plunger, but be sure to cover the bowl completely with the cling wrap.

Once you’ve removed the clog, you can then unplug the toilet by inserting the hose into the drain. A high-pitched whine will indicate that the clog is removed. You can also try using old towels to seal the drain. This will make the process easier and safer. A wet/dry vacuum is more powerful than a regular household vacuum, so always be sure to supervise it when using it around your toilet.

Using a plunger to unplug a toilet

When it comes to unplugging a toilet, a plunger can come in handy. They are available at home improvement stores and grocery stores. There are two common types of plungers: flange and cup. It is good to have one of each on hand. Understanding which one is best can help you choose the correct one. If you don’t have one, here are some tips to make sure you get the best one for the job.

To use the plunger, turn the plunger head downward until it reaches the bottom of the toilet tank. Be careful not to release the pressure before it’s done because it may break the seal around the cup. If the tank lid is firmly on, remove it to expose the round rubber trap door, or flapper. This door is located near the bottom center of the tank. Using the plunger to unplug a toilet can save you a trip to the plumber.

Another way to unclog a toilet is to use a wire coat hanger. Make sure it’s wrapped in a cloth or duct taped to avoid scratching the floor. Use the hanger to push debris down the pipe. Make sure to push it in a circular motion until it hits the obstruction. Repeat as necessary until the water drains completely. If this doesn’t work, you may have a hidden problem in the drain.

Alternatively, you can try unplugging a toilet without a plunger by using hot water and soap. These methods are most effective when used with a bucket or a five-gallon bucket. A hand soap dispenser will also work. The water can be hot enough to use on a toilet and can also be used as a soap solution. Using a plunger can save a life.

You should have two plungers available. If you have a double sink, one of them should be placed above the drain. In addition to the plunger, a rag or inverted drinking glass can be placed into the drain for temporary sealing. It can also save your hand. If you don’t have a plunger, you can use a second plunger, but be careful not to scratch the porcelain.

When using a plunger, remember to use a gentle push and a firm pull. Pushing the plunger with a forceful effort will likely break the gasket that seals the toilet. The force of the water created by the suction will free the clog. However, be sure to remove any objects that won’t be flushed with the flush. You may have to repeat this procedure several times if you don’t notice a difference.

Read More:   How to Use a Dewalt Drill – Best Guide

In addition to the plunger, you may want to consider a toilet auger. This specialty drain snake is a good option if the plunger has failed to unclog the toilet. This tool is made of flexible wire that will reach deep into the toilet without scratching the bowl. When you are using a plunger to unplug a toilet, you should always wear gloves when using it.

Why trust Handyman.Guide?

s written by Itamar Ben-Dor, who has 25 years of experience in renovations, carpentry, locks, creation, landscaping, painting, furniture construction, and furniture renovation, works with concrete, plumbing, door repair, and more.

Itamar Ben-Dor has been in the home improvement business for over 25 years. Itamar Ben-Dor is a jack of all trades. He's worked in the renovation field for years, doing everything from locksmithing to carpentry. He's a small repairs specialist. But his true passion lies in furniture construction and renovation - he loves seeing old pieces come back to life with some new woodwork or a fresh coat of paint.

He has taken courses on many topics in these fields at professional colleges in Israel. Over the years, Itamar has also become quite skilled in gardening, carpentry, and renovations. He's worked on projects of all sizes, from massive renovations to small repairs. No job is too big or too small for him!

Disclosure: participates in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for publishers to earn fees by linking to and affiliated sites.