How to Refinish Cherry Furniture

We research in-depth and provide unbiased reviews and recommendations on the best products. We strive to give you the most accurate information. If you buy something through our links, we may earn a commission.

If you’re wondering how to refinish cherry furniture, you have plenty of options. Oil finish is a good option because it’s relatively easy to apply, but you will need to wipe the surface with a rag after each coat. This job can get tedious, so make sure you dispose of the rags properly. After you apply the first coat, sand it down and repeat the process until you get the right shade, even layer, and sheen.

Staining cherry wood

Natural cherry wood is a desirable hardwood for furniture because it is very easy to work with and has outstanding aesthetics. If you take proper care, this wood will last for generations. The most common kind of cherry used in furniture is sapwood, which is light in color. Staining the wood will make it appear darker, but the color will not change permanently. After staining, the color will intensify over time.

A stain for cherry wood is an excellent way to change the look of a piece of furniture. However, it is important not to over-stain cherry wood, as it tends to blotch when too much stain is applied. A cloth allows you to control how much stain you apply and ensures even coverage of the entire board. You can also stain from one end of the board to the other.

A drying oil finish can be applied in several ways, such as wiping, brushing, or spraying. Because cherry wood has a sponge-like quality, it soaks up the stain and doesn’t harden. To avoid blotches, however, you must wipe off excess finish using a clean rag. Once the surface has been stained, sand it until it is smooth. Repeat this process until you’ve achieved the desired shade, uniform layer, and sheen.

When staining cherry wood furniture, you should first prepare the wood. Cherry wood is a difficult wood to stain. The grain of cherry wood absorbs the stain color differently. This results in lighter and darker spots on the surface. A good way to avoid this is to mix a solid piece of cherry with a layer of cherry plywood. This will prevent uneven staining. A good way to achieve a natural-looking finish on your furniture is to mix solid cherry with cherry plywood.

Using a solvent-based primer

Applying a solvent-based primer is essential to the process of refinishing cherry furniture. As cherry wood discharges red-wine tannin, painting it with a latex primer will not work. If the cabinet was stained with cherry before, you should apply a shellac or oil primer to protect it. After the primer dries, apply the finish of your choice.

Once the paint has dried, use a clear shellac primer. This will block any bleed-through or odors. The downside of using an oil-based primer is that it’s a little more difficult to clean up. However, there are odorless versions available. One of my favorite oil-based primers is Zinsser Cover Stain, which can cover up stains and odors.

Oil-based primers are an excellent alternative to water-based ones. They lay down well on the surface and do not contain a strong odor. They also fill in the grain better than water-based primers. However, it’s important to follow the manufacturer’s instructions when applying a primer. You’ll want to ensure that the primer covers the entire surface evenly. Then, apply the finish.

Read More:   How to Bend Wood Easily

The oil-based primer will keep the new paint from showing through any dark stains. It will also ensure that the paint adheres properly to the surface. Using a solvent-based primer will ensure that the final finish will have better coverage than a chalk paint. This primer is an important step to ensure that your furniture looks great after you’ve completed the project. You can even add a finish coat if the original paint has deteriorated.

If you’re looking for a longer-lasting finish for your furniture, you may want to consider using a wax-based polish. However, before applying a varnish or acrylic paint to a cherry cabinet, it’s important to make sure it’s properly primed. You don’t want it to peel off when you’re working on it. A solvent-based primer helps to prevent this problem and allows you to apply the paint in layers.

Applying a clear shellac finish

Before you begin applying a clear shellac finish to your cherry furniture, you must sand the surface with 400-grit sandpaper. You may want to use two coats of shellac to achieve the desired finish. You should also consider using a golden-brown dye to balance out color differences. Then, use clear shellac to apply a second layer, and so on. You may want to do this process several times until you get the desired finish.

After applying the finish, you should wipe the surface with a damp cloth. Once this has dried, you can use a muslin to smooth out the finish. You should use long strokes, going with the grain of the wood. Then, you should use a white sock or a lint-free polishing cloth to pad the surface. To ensure that the finish is even, repeat the process if necessary.

Shellac is a popular choice for a clear finish, and it can give your cherry furniture an enduring look. It builds quickly and creates a strong bond with the topcoat. It also blocks smoky and musty smells. While you might want to be sure to follow the instructions carefully, it’s worth taking the time to do a proper job. And if you don’t like the color of the finish, you can always apply more shellac or wax.

Once the first coat has dried, sand lightly with 320-grit sandpaper to remove any excess shellac. You should then repeat the process with a second coat. Shellac dries quickly at 70 degrees Fahrenheit and fifty-seven percent humidity. A final coat can be applied after an hour. One hour between coats allows the new coat to absorb the old one.

Applying a glaze finish

Before applying a glaze finish to your cherry furniture, it is important to understand how the glaze looks in its liquid state and how it will look when painted. Glazes differ greatly from one another, and you will need to do some testing before you begin. This will save you time and headaches later. This is particularly important if the wood on your piece is relatively light. Afterwards, you can add a coat of polyurethane to protect it.

To apply a glaze finish to your cherry furniture, first prepare your surface with a base coat of varnish. This will protect the wood and prevent it from becoming stained or scratched. After applying the glaze, use a bristle brush to spread it evenly across the surface of the furniture. You should wipe off any excess glaze using a rag in the direction of the wood grain. To give your piece an aged look, apply a thicker glaze than the one you normally would. Make sure to allow the piece 24 hours before handling it.

Read More:   Delta 36-6023 Table Saw

Before applying a glaze finish to your cherry furniture, it is necessary to choose the right one. Glazes are not paints, but are media used to give wood a softer appearance and a different look. While some glazes are clear, others are colored and give the wood a warmer look. The Real Milk Paint Co. burnishing glaze comes in warm hues, and you will not have to mix colors to get the desired color.

If you decide to apply a glaze finish to your cherry furniture, it is advisable to use an oil-based paint. If you are unsure of the exact color, you can add boiled linseed oil to the paint to create a more vibrant finish. Depending on the type of glaze you choose, you can also add color to the wood with other materials. Alternatively, you can apply a glaze finish using a brush.

Sanding off the old finish

Before you can apply new finish, you must sand off the old one. The old finish will make the cherry wood look dingy and crooked. If you’re trying to match the new finish to modern furniture, cherry wood will be difficult to blend with. However, you can always opt for the natural wood color. Here are some steps to sand off the old finish on cherry furniture.

First, prepare your workspace by vacuuming or shop vaccing all surfaces. Make sure to vacuum up any dust that gets under topcoats and stains. Then, wipe down the wood surface with a damp cloth before applying the new finish. Always remember to stir the products well before you apply them on your furniture. This ensures that the ingredients are evenly dispersed. Afterwards, the cherry furniture is ready to be stained.

To prepare the surface of the new finish, you must sand off the old finish. After sanding, use 220-grit sandpaper. Sanding will improve the adhesion of the primer and the finish. It will also remove any imperfections in the finish. Then, use a damp cloth to wipe off all dust and debris. Finally, apply a second layer of new finish.

Next, apply a coat of polyurethane. You can use either satin or semi-gloss finish on the cherry wood. Wipe off any excess with a clean cloth. If you want a natural look, try using natural oil finish on the cherry wood. But you should always remember to follow the instructions carefully or risk damaging your wood. poivronine stains are especially effective on cherry wood.

Why trust Handyman.Guide?

s written by Itamar Ben-Dor, who has 25 years of experience in renovations, carpentry, locks, creation, landscaping, painting, furniture construction, and furniture renovation, works with concrete, plumbing, door repair, and more.

Itamar Ben-Dor has been in the home improvement business for over 25 years. Itamar Ben-Dor is a jack of all trades. He's worked in the renovation field for years, doing everything from locksmithing to carpentry. He's a small repairs specialist. But his true passion lies in furniture construction and renovation - he loves seeing old pieces come back to life with some new woodwork or a fresh coat of paint.

He has taken courses on many topics in these fields at professional colleges in Israel. Over the years, Itamar has also become quite skilled in gardening, carpentry, and renovations. He's worked on projects of all sizes, from massive renovations to small repairs. No job is too big or too small for him!

Disclosure: participates in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for publishers to earn fees by linking to and affiliated sites.