How to Paint Stucco

We research in-depth and provide unbiased reviews and recommendations on the best products. We strive to give you the most accurate information. If you buy something through our links, we may earn a commission.

There are several different ways to paint stucco. Here are a few tips on the preparation process, the types of paint, and color choices. Whether you are painting your house or a rental property, there are some steps that you should take before you begin. The first step is to prepare the surface. You can use a power washer or rough brush to remove dirt and debris. Afterward, use an elastomeric coating or primer to protect the surface.

Painting stucco

If you have ever wanted to give your stucco home a makeover, you may be wondering how to paint stucco. The process is similar to painting wood siding, and following the steps outlined below will help you achieve the look you desire. Whether you plan to paint the stucco first or the walls afterwards, you will need the following materials and tools. You will need acrylic latex exterior paint with a flat finish.

Before you start painting the stucco exterior, you must first clean it thoroughly. You can use a push broom to remove the dirt. If the dirt is particularly stubborn, you may need a pressure washer. This will cost anywhere from $450 to $800, and will require time to dry. Using a step ladder will make accessing high walls easier. You may also want to buy a moisture meter, which you can buy online.

A roller is ideal for painting stucco walls. It is easier to work on a roller with a thick nap than a brush, but it will take longer to complete a project. It also gives you an even, professional finish. Choose a roller with a 3/8” nap. This will help you reach low spots and ensure an even coat of paint. And don’t forget to use a roller grid in your paint bucket to help you apply the paint evenly.

Preparing the surface

If you are planning to paint a stucco wall, you should prepare the surface first. Stucco is a porous material that absorbs water. Consequently, it will absorb paint faster when it is not properly hydrated. You can hydrate your stucco wall by spraying water on the surface and allowing it to absorb the water for a few minutes. Depending on the exposure conditions, you may need to apply more water than a north or east-facing wall. You may also need to lower the pH level.

The next step in the painting process is to wash your house. To do this, use warm water and soap. Then, scrub it off with a garden hose. Power washers may not be safe because they inject water behind the stucco surface. Then, wait for the surface to dry completely before applying a finish coat of paint. Then, prepare the surrounding area and move furniture out of the way.

After preparing the surface before painting stucco, you need to clean it. Use a push broom and a stiff brush. If you need to do an interior wall, you can use the vacuum attachment. Make sure to use a quality paint cleaner and follow the manufacturer’s instructions. You can also use a power washer to remove dirt and debris from the walls. Make sure to rinse the surface thoroughly and let it dry for 24 hours before painting.

Using elastomeric coatings

There are two main approaches for painting stucco: masonry primer or exterior paint. These methods will yield good results. However, you need to apply the elastomeric coatings in thick coats to achieve the desired effect. These coatings require higher temperatures and longer drying times. For this reason, they are not recommended for use in the home. If you’re considering painting stucco, here are some things to keep in mind.

Read More:   How To Drill Out A Screw: Best Guide

First of all, elastomeric coatings are waterproof. They protect your structure from the elements and are also resistant to mildew and chemical reactions. They can also be tinted to different colors, and they retain their color well over time. They also preserve the attractive look of your building and ward off the less appealing effects of damage. However, they are not for everyone.

Elastomeric paint is thicker than regular paint. Some people have trouble applying it. Many DIY-ers use too much thinner or over-thick paints and end up with lumps and bumps on their stucco surfaces. In addition, improper application will cause the paint to crack when it dries. Lastly, elastomeric paint is not suitable for everyone.

One of the main benefits of elastomeric paints is that they can be a more durable option for painting stucco. They are also more energy efficient, which can be beneficial in hot climates. Using elastomeric coatings for stucco will make your home more energy-efficient and protect it from the sun. However, they can also increase the lifespan of your home.

Color options

Color options for stucco are nearly endless. Many homeowners enjoy the neutral tones of sand, peach, and tan. However, you can easily paint your stucco home any color you want as long as you follow the proper care and maintenance procedures. Listed below are a few ways you can customize the look of your stucco wall. In addition to painting, you can also use oxide coloring.

Neutral: When choosing colors for stucco, it’s best to stick with traditional neutral tones. Neutral shades are safe choices because they don’t compete with the trim and landscaping. However, if you want to make a bold statement, you can choose a bold trim color. To make your stucco stand out from the crowd, choose shades that don’t have a warm undertone. You’ll get the effect you want and avoid the common mistakes of choosing the wrong color.

While choosing a color for the exterior of your stucco, you need to consider the roof color and other permanent fixtures. For example, if your stucco home is situated on a hill, you should choose a darker shade of trim to accent it. A bold black stucco color is a bold choice, but it will stand out against the rest of your home’s exterior. In contrast, a deep blue tone can highlight outdoor lighting.


While polyurethane caulking is an excellent choice for small cracks in stucco, silicone is better suited for larger areas. While this type of caulk adheres to most surfaces, it is not as effective as polyurethane and is not a good choice for larger cracks in stucco. If you are going to be repainting the patch, you should stick to acrylic caulking.

Another type of caulking is sanded caulking. This type is meant to be applied to finished stucco surfaces. Sanded caulking is best used on medium-to-rough stucco surfaces, but can be used on smoother surfaces as well. While sanded caulking conceals better than acrylic, it also has a higher cost. Caulking stucco and trim together will make the entire structure more watertight.

Depending on the size of the crack, you may need to use a combination of techniques to seal the crack. While sanding can be a quick fix for superficial stucco cracks, caulking is an effective long-term solution. It’s available at hardware stores in tubs or in caulking guns. To apply caulk, trace the crack with your finger and make sure that you fill it completely. After applying the caulk, wipe it off with a sponge to remove excess caulk.

Read More:   How to build a pergola from scratch

After applying caulk to the crack, you can paint the area to match. This way, the patch will blend seamlessly with the finish. After the patch is finished, you can apply a synthetic finish or blend an exterior paint over it. This process will be more effective if you apply caulking along the cracks than it does if it’s applied too late. The caulking material should match the color of the walls.

Back rolling helps blend in the paint

If you want to paint your ceiling and have difficulty blending the paint, back rolling can be of great help. First, remove the roller from the extension pole, climb a ladder, and point it towards the ceiling. Next, roll in vertical strokes from the bottom up, and then repeat the process for the sides of the painted area. To get the best results, practice back rolling over the entire ceiling before attempting it on the wall.

Professional painters commonly use paint sprayers to apply paint. But, the sprayed-on paint does not always adhere to plaster surfaces as well as it does on drywall. Moreover, rolled-on latex paint adheres to plaster surfaces better. Back rolling helps blend in paint by pressing the paint from the sprayer into the wall using a roller. Back rolling also fills in small holes and cracks.

To create a professional-looking finish, painters must follow some guidelines. In the case of walls, back rolling helps them apply paint to a smooth surface. When back rolling, painters must apply a light coat of paint to the same wall with a sweeping motion that creates a slight angle. It’s also important to cut in an overlapping line to avoid blending in paint. Back rolling should be practiced by painters who use airless spraying.

Why trust Handyman.Guide?

s written by Itamar Ben-Dor, who has 25 years of experience in renovations, carpentry, locks, creation, landscaping, painting, furniture construction, and furniture renovation, works with concrete, plumbing, door repair, and more.

Itamar Ben-Dor has been in the home improvement business for over 25 years. Itamar Ben-Dor is a jack of all trades. He's worked in the renovation field for years, doing everything from locksmithing to carpentry. He's a small repairs specialist. But his true passion lies in furniture construction and renovation - he loves seeing old pieces come back to life with some new woodwork or a fresh coat of paint.

He has taken courses on many topics in these fields at professional colleges in Israel. Over the years, Itamar has also become quite skilled in gardening, carpentry, and renovations. He's worked on projects of all sizes, from massive renovations to small repairs. No job is too big or too small for him!

Disclosure: participates in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for publishers to earn fees by linking to and affiliated sites.