We research in-depth and provide unbiased reviews and recommendations on the best products. We strive to give you the most accurate information. If you buy something through our links, we may earn a commission.
The process of lining a box can be done by either gluing wool-blend or corrugated cardboard to the box or by cutting and gluing pipe cleaners to the edges of the box. Depending on the thickness of the material, you may need to cut the mat board smaller than the area to be lined. Once you’ve cut the mat board to the size you want, you can wrap it around the piece leaving about an inch margin. Glue it around the piece of cardboard using hot glue (or GOOP or E-6000) or goop. Be careful as heat will make hot glue soften).
Glue batting to cardboard
To line a box with felt, first measure the bottom and sides of the cardboard box. They should be about 1/8″ smaller than the box’s original bottom measurement. Cut the cardboard rectangle to the desired size and align the pieces. Next, apply glue to one side of the wadding. Trim the fabric edges so they are even with the cardboard’s edge. Once the glue is dry, glue the fabric to the cardboard. Be careful not to glue the fabric over the cardboard as it may buckle.
Now, cut a piece of lightweight cardstock so it fits inside the box. 80-lb. cardstock is fine. Cut the fabric so that it overlaps by 1/4″. You can use a cardboard scrap or a piece of fabric cut to size. Once you have all the pieces cut, glue them to the cardboard. Let dry completely before you glue it on. You can decorate the top of the box with ribbon or other materials.
Apply a bead of glue on one side of the fabric. Make sure that the glue is secure. The cardboard should not buckle or shift when you pull the fabric firmly. You may need to make adjustments once the glue dries. Once it is dry, glue the felt to the cardboard. This is the basic step in lining a box with felt. If you have a piece of cardboard or a small cardboard piece, you can use a brayer to adhere the two pieces together.
Once the glue has dried, you can apply trim to the edges. You can also glue the trim to the inside of the box. You can use bulldog clips to secure the fabric. Glue the fabric to the cardboard and leave it to dry for a couple of days. This step is a great way to make a unique gift for a loved one. And remember to have fun!
Glue wool-blend felt to wood
Before you begin gluing the felt to the wood, be sure to gather all the supplies you need. Some glues are quicker to dry than others. After applying the felt to the wood, smooth the surface with a credit card or roller. Once the adhesive is dry, remove the credit card or roller and let it dry overnight. Then, repeat the process. Once the glue has completely dried, the project will look great.
Next, mark the edges of the felt. Using a pencil to mark the edges of the felt is the easiest option, but a pen or marker will leave permanent marks on the wood surface. Also, remember to use wax paper to weigh down the wet glue. Reynolds makes the best brand of wax paper for this purpose. If you are cutting the felt by hand, make sure to follow the template so you get the proper size.
When it comes to glue, transparent glue is best. A transparent glue will show the true color of the wool-blend felt when it cures. Some glues are opaque when cured, and that can ruin the overall aesthetic appeal of the project. Another common DIY glue is white craft glue, but that doesn’t work well for gluing felt to wood. The thin consistency of white craft glue will make it difficult to bond with the wood and may not stay in place.
If you’re looking for a good glue to glue wool-blend felt to wood, look no further than Aleene’s All Purpose Tacky Glue. This glue dries clear and does not yellow. It works well with wood and other semi-porous surfaces. This glue can last for many projects and is also non-toxic. If you choose to use a reusable glue, make sure to buy paint thinners to prevent it from leaking and getting everywhere.
Create an even weave pattern
When you line a box with felt, the best way to ensure that the material is woven evenly is to purchase a piece of fabric with an even weave pattern. An even weave fabric has the same pattern on both sides and can be cut to the desired size. If you are using huck toweling, you do not need to purchase an even weave fabric. The only difference between an even weave and huck toweling is the direction of the weave.
While aida has small irregularities, evenweave is an ideal material for lining a box. It is made of small, even strands of thread. The basic process is similar. To stitch an even weave on aida, you stitch diagonally across the holes. Then you back up the stitch so that you can see the thread. Once you’re finished, you can cut the box and line it with the desired color of felt.
Glue pipe cleaners to the edges of a box
Make flower shapes using pipe cleaners. For example, two pipe cleaners twisted together in the center will make a flower. Place the flower in a flower pot or vase, or make jewelry by twisting two pipe cleaners together half way. If you’re making a craft for children, use different colors of pipe cleaners to make different flowers. Add pom-poms or other small items to create interesting designs.
To make a Christmas tree, cut two lengths of brown pipe cleaners. Bend one end into an antler shape. Place the other end underneath the front piece. Glue two small pieces on top of the large piece. Then, bend the pipe cleaner into a circle shape. Let it dry and then repeat. You should have a circle of pipe cleaners at the top and bottom of the box.
After the glue has dried, bejeweled the pipe cleaners or twist them. Make a spider using several pipe cleaners. You can use a small pipe cleaner for the web. You can also make a spider web using pipe cleaners. To attach the spider to the web, you need to glue the spider to the web. If you’re making a Halloween decoration for a child, you can also wrap the pipe cleaners around yarn to create a spider web.
Another fun way to decorate the inside of a box is with pipe cleaners. String some beads on the ends of the pipe cleaners to add to the decorations. You can also string some beads on the pipe cleaners to make them more appealing. Glue the pipe cleaners to the edges of the box using hot glue. These decorations are perfect for Halloween! This project will surely amaze your kids!
Remove felt from a box
When you need to remove felt from a box, first make sure that you have plenty of water. This will help the felt slide out of the box. You can also use acetone to remove any adhesive that has stuck to the box. If the glue is too thick, you can use a rotary cutter. The X-acto knife is not suitable because it will tear the fabric. Once you have removed the liner, you can proceed with the rest of the box.
