We research in-depth and provide unbiased reviews and recommendations on the best products. We strive to give you the most accurate information. If you buy something through our links, we may earn a commission.
If you’ve ever wondered how to store clamps, you’ve come to the right place. There are many options available to help you organize your clamps. You can use a PVC pipe clamp storage rack, clamp carts from Rockler, or even a Quick-and-easy sliding-head clamp holder. However, you can also consider making your own clamp storage system to accommodate the number and type of clamps you use most often.
PVC pipe clamp storage rack
You can build a simple pipe clamp storage rack out of scrap 2x4s and a 3/4-inch backer board. Make sure the bottom edges are squared and angled 45 degrees to make sliding the clamps into the rack easier. Measure the outside diameter of your pipes and add 1/8 inch for the distance between the blocks. Then, mount the rack on a wall using screw eyes. Once it’s finished, you’ll be able to store all your clamps in a convenient, accessible place.
A PVC pipe clamp storage rack is a simple, portable, and easy-to-build tool storage solution. A 2-inch x 4-inch piece of wood is used to frame the rack’s openings, which are drilled one-quarter inch apart. Next, use a 2-inch wood stud to construct two pieces that are 33 1/2 inches long. Next, use plywood squares cut into 10-inch squares.
The short clamp rack is a good choice for smaller jobs, since it can accommodate a wide range of shapes. It can hold both C-clamps and quick-release clamps. For a more durable rack, you may want to use metal conduit instead of a dowel rod. It’s stiffer and more durable than wooden dowel rod. Remember to set the first length of conduit about two feet from the wall, then add another one at strategic intervals.
In addition to holding pipes, pipe clamps are also useful for making table tops and cabinet components. They can be used to join three or more boards together and even provide corner framing for a cabinet or box. As long as the pipes are threaded, the clamps will hold them in place, and your work will be organized. These clamps can be found in a wide range of uses and are worth the investment.
Rockler Pack Rack clamp carts
Rockler’s Parallel Clamp Rack accommodates all brands of parallel clamps. It features slotted or pre-drilled holes to hold 12 or more clamps. It attaches to Pack Rack (21834), which is sold separately. When used with Pack Rack, the Parallel Clamp Rack’s corresponding holes match the holes in the Pack, so that the clamps are stored in the appropriate orientation. The Parallel Clamp Rack is constructed of galvanized steel, so you can rest assured that your clamps will stay organized and protected.
Another great feature is the heavy-duty urethane casters that make rolling the rack easy. Even with a full load of clamps, it rolls around the shop like a dream. This caster mechanism makes rolling the rack around the shop an effortless experience, even when it’s full of clamps. Regardless of the size of the shop, Rockler Pack Rack clamp carts are sturdy, durable, and highly portable.
The Rockler Pack Rack Clamp & Storage System is built to withstand a lot of use. It is easy to move it from place to place and has four polyurethane casters for easy mobility. This durable rolling unit also features carriage bolts to assemble the frame. These bolts have square ends and ensure that the frame stays aligned while assembling. The Rack has eight steel rods for hanging clamps, and these rest on multiple points for extra strength.
George’s leaning rack
If you’re looking for a convenient and safe way to store your clamps, consider purchasing George’s leaning rack for clamp storage. This sturdy, galvanized steel rack will hold up to fifteen F-style bar clamps. Because it’s meant to hang from the wall, it requires a minimum clearance of two inches above the floor. You’ll need to secure the rack to the wall with 1/4″ lag bolt fasteners. Just be sure to engage the pipe clamps completely in the slot.
Once you’ve purchased a George’s leaning rack for clamp storage, it’s time to put it together. There are many ways to customize your rack to fit your needs. The horizontal support should be cut with three-eighth-inch round-overs and notches spaced 15/8″ apart. Then, you’ll need to install a dado blade to your tablesaw, and a wood extension to your miter gauge. After the wood extension is mounted, you can use the miter gauge to cut slots in the horizontal support. Use your clamps to hold the wood pieces in place while you build the rest of the rack.
Quick-and-easy holder for sliding-head clamps
The Quick-and-easy holder for sliding-head clamps features slots to store the sliding-head clamp. These slots allow users to rest the clamp head on a horizontal support while using it, making storage a breeze. With no slots, clamps would be unable to stay in place without tightening or loosening the clamp’s jaws. By making storage easier, this tool is a valuable addition to any workshop.
These clamps are ideal for gluing large pieces together. They hold two pieces of material together at right angles, and can be adjusted from one inch to eight inches in length. This type of clamp is used in woodworking projects, as well as welding projects. You can use it to clamp an entire square or rectangle. The quick-and-easy holder for sliding head clamps is also great for assembling larger projects.
These bar clamps feature a zinc-plated hardened steel head for added strength. They also feature rounded edges to prevent splintering and reduce stress on clamp rack slots. These clamps are available in 2-pack and four-pack options. They are also available in a 5-pack. They are also compact enough to fit in your toolbox. The four-pack size is ideal for a home workshop, where space is at a premium.
The WORKPRO Spring Clamp 16-Piece Set is perfect for multiple applications. It can be used for woodworking, DIY home improvement projects, photography, and even for art backdrops. The clamp’s blue nylon construction is strong and durable, while the rubberized handle makes it easy to use. There are also two sizes of jaw openings. Regardless of the size of your project, these clamps will help you get the job done quickly.
Keeping glue off clamps
Keeping glue off clamps is an important part of woodworking. While woodworking professionals do their best to keep clamps clean, the glue residue can eventually damage them and make them difficult to use. By using the correct techniques, wood clamps can last much longer. Here are a few tips. Keeping glue off clamps will extend their useful life! Use these tips to keep your clamps looking great for years to come.
First, you need to heat the water until it is at its optimal temperature. After that, apply the hot water using a rag or a wet towel. Then, use a putty knife to scrape out the glue residue. Alternatively, a steel brush can be used for robust glue residues. Once the water has cooled, dry the clamp thoroughly. Then, you can apply the acetone.
Another way to keep glue off clamps is to place the stock above the clamp bars. You can buy a set of 3M Surface Gard medium duty felt pads for under $3 at home centers and on the internet. The sticky-backed side of the felt pad will stick to the clamp’s jaw surfaces. It also keeps the felt pad from sliding as you clamp. One reader, Harry Lohr, suggested using a hand screw to clamp the pieces.
After using wood clamps, you should clean them thoroughly. You can use a vinegar solution to remove the dried glue. It breaks down the glue’s structure, allowing you to use it again. You should be sure to soak the clamp completely in the vinegar solution. Then, use a Scotch-Brite pad to scrub the remaining glue off. Afterwards, dry them thoroughly with a soft cloth. You should also store your clamps away from heat to prevent rusting.
