How to Remove Stamps From Wood

We research in-depth and provide unbiased reviews and recommendations on the best products. We strive to give you the most accurate information. If you buy something through our links, we may earn a commission.

If you’re trying to stain your wood and want to get your original stamp look, you might be wondering how to remove stamps from wood. There are many options you can try, including Oxylic acid, sandpaper, and Goo Gone. These products will all help you get rid of your stamps without damaging the wood. However, you should be careful to do your sanding before you stain the wood, or else the stamp will remain permanently in place.

Oxylic acid

If you’re looking for a way to remove stamps and stains from wood, you’ll be happy to know that oxalic acid is an effective solution. This chemical, which is derived from rhubarb leaves, can be found in household bleach and deck brightening solutions. Just be sure not to get it on your skin or eyes – it can cause serious burns.

Because oxalic acid is a concentrate, it’s essential to dilute it by four parts water. A stronger solution will harm the wood, so make sure the Oxcon is applied to a dry area. Always remember not to let Oxcon remain on the wood longer than 15 minutes. You can wet the area beforehand if it’s a hot day. And be sure to mist the area before applying Oxcon to prevent a high concentration of acid. Never leave the solution on the wood, because it can become brittle and hard to remove once it has dried.

Once you’ve prepared your solution, you can begin to remove stamps. You can use a fine paintbrush or a rag to apply the solution. After applying it, you’ll need to wipe off any other surfaces and wait for the acid to dry. If the stain is particularly stubborn, you can try applying an acid cleaner containing sodium metasilicate, borax, or caustic soda. You can mix the acid and water in equal parts before applying it to the stamp. If the stain is too strong, you can repeat the process and apply the acid again.

If you’ve already applied Oxylic acid to the wood, you should be sure to wipe the surface thoroughly with a dark rag to make sure there’s no residue. You can also wipe the wood with a dry rag to check for any powder left on it. If you still notice any residue, you must rinse the area with hot water and dry it again. This process will take several attempts, so make sure you are prepared to repeat the procedure multiple times.

You can also use two-part wood bleaches. These products lighten the wood all over and remove the dyes and pigments. You can buy pre-mixed Oxalic acid in a 150-ml bottle. The solution will last for 15-17 litres. If you need more than one application, you can purchase a 2.5-liter bottle or a 1L bottle.


If you have wood projects, stamps are an excellent way to transfer words, images, and decorative shapes to the material. This is a good way to personalize them, but the wood may not be perfectly smooth. In such cases, you can use sandpaper to even out the surface and remove any oils. Also, sanding helps prevent ink from soaking into the wood. The best way to remove stamps from wood is to sand them well before staining or painting them.

Read More:   How to Cut Melamine

If the ink has penetrated the wood, bleaching it can help. To apply the bleach, dilute one part of normal household bleach and one part water. Apply the solution to the stained wood using a soft cloth. Let it sit for a few minutes and scrub it with a brush, if necessary. For more stubborn ink stains, you can try oxylic acid, which is commonly found in deck brightening solutions.

Pressure-treated lumber is typically marked with grade stamps. It is difficult to remove these markings, since your clients have not yet decided on the color of the stain. However, there is a simple method to remove PT lumber stamps with sandpaper. If the stamp is on a surface area, you can sand it using 150-grit sandpaper. Some deck builders use paint thinner to remove the stamps.

Sandpaper is a critical instrument for smoothing out surfaces. There are many different types of sandpaper, each intended for different types of surfaces. You need to choose a suitable sandpaper based on the surface you’re working on. It will be difficult to remove the stamps from wood if you don’t use the right type of sandpaper. If you don’t know which kind of sandpaper you need, try Google search for “how to remove stamps from wood” and you’ll see the best options.

Baking soda is another way to remove ink stains. You can apply it to the stamp with a damp cloth, and it should lift the stain. You can also try baking soda on the wood before applying wax to stain it. If you don’t have baking soda, you can use a paste of baking soda on it. You should apply the paste in small amounts until the mixture is thick enough.

Goo Gone

Using citrus-based air fresheners such as Goo Gone can help remove dried-on glue. Citrus Magic and Zep are also effective at removing dried-on glue. Then use Goo Gone Original to break down the remaining glue. Once you’ve removed the remaining glue, you can mount the stamps back in their albums. You can use the same techniques to remove stamps mounted on wood.

Paint/ink removal products

If you are concerned about removing a wood-stamped logo, you can try bleaching the logo using normal household bleach. Dilute one part bleach to one part water, apply it to the wood using a soft cloth, and allow it to soak for several minutes. You can also use oxylic acid, commonly found in deck brightening solutions. It will dissolve the ink stain, so try this solution if you’re not satisfied with bleaching.

For ink stains, you can try rubbing alcohol, soap, and toothpaste. Those products may have a strong chemical ad could damage the wood. Another solution is baking soda and water paste. This mixture can work well to lift ink stains from wooden furniture. You should always apply it with your fingertips to avoid damaging the surface. If the baking soda does not lift the ink, use a new cotton ball.

If you have pressure-treated wood, you’ll find an ink stamp on it. It’s used to represent the sawmill where the lumber was cut and graded. This ink stain is unsightly and may even fade with time. If you are worried about the permanent stain left by a mill stamp, there are several ways to remove it from the wood. You can also try applying a dampened magic eraser on the stained area. But remember to follow the directions on the package.

Read More:   What Size Shop Vacuum Do I Need?

One of the easiest ways to remove an ink stamp is to use baking soda and water. If the ink is permanent, baking soda and water paste will work well to remove it. But if it isn’t, you can also use an ink removal product. If it’s not, you can try baking soda paste instead. You’ll find that it works well and will save you from spending the money on professional removal.

Using a combination of lemon juice and detergent to remove ink from walls is another option. However, you must test the solution first in an inconspicuous area to avoid causing further damage to your walls. You may have to repeat the process several times before you get rid of the ink stain from your walls. You’ll need to repeat the process several times if your ink is too dry or it spreads deeper into the surface.

Why trust Handyman.Guide?

s written by Itamar Ben-Dor, who has 25 years of experience in renovations, carpentry, locks, creation, landscaping, painting, furniture construction, and furniture renovation, works with concrete, plumbing, door repair, and more.

Itamar Ben-Dor has been in the home improvement business for over 25 years. Itamar Ben-Dor is a jack of all trades. He's worked in the renovation field for years, doing everything from locksmithing to carpentry. He's a small repairs specialist. But his true passion lies in furniture construction and renovation - he loves seeing old pieces come back to life with some new woodwork or a fresh coat of paint.

He has taken courses on many topics in these fields at professional colleges in Israel. Over the years, Itamar has also become quite skilled in gardening, carpentry, and renovations. He's worked on projects of all sizes, from massive renovations to small repairs. No job is too big or too small for him!

Disclosure: participates in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for publishers to earn fees by linking to and affiliated sites.