How to Get Rid of Bats in Your Home

We research in-depth and provide unbiased reviews and recommendations on the best products. We strive to give you the most accurate information. If you buy something through our links, we may earn a commission.

You might be wondering how to get rid of bats in your home. There are a variety of options to get rid of bats. Some of them include the use of one-way valves, Copper mesh, and Mothballs. However, not all of these solutions work. These methods can be ineffective if the bats are already living in your house. To get rid of bats, you should follow the instructions below carefully.


To get rid of bats, you should purchase a product that has the active ingredient dichlorobenzene. It is less toxic than naphthalene and can be used for both indoor and outdoor applications. The smell of mothballs is very unpleasant for bats, and they will be less inclined to enter your attic. However, the chemicals in mothballs can be dangerous to people and pets. They can cause severe allergic reactions and may not be safe for your children or pets.

Before applying mothballs, you should identify the species that inhabit the area. If you suspect a bat, you should contact an environmental protection center immediately. Bats have different species, and they will leave a bat baby and cause a variety of health problems. Mothballs also repel a wide variety of pests, and they work well for bats. They smell very strong, so it is important to wear heavy gloves and a mask before using them.

You can also try putting a few mothballs in the attic. You should also eliminate any plants that bats prefer, including those that attract bats. The smell of mothballs may not last for long. You may have to replace them often, and the smell may not be pleasant for you. The odor can spread throughout the entire house, and you must be sure to replace them after a few months. Also, the smell of naphthalene can be harmful if it is exposed for an extended period of time.

One-way valves

There are many types of one-way bat removal valves, including ones made of PVC pipe, an empty tube of caulk, mesh netting, or wire screens. These devices are similar to the ones you’d see in a country-road mailbox, but they’re designed to allow bats to come and go in a single direction only. Install a one-way valve in each of the entrances and exits to your home, and you’ll be on your way to bat-free peace of mind.

Before you install the one-way valves, make sure you know which areas are vulnerable to bats. Make sure that you identify the areas that are most likely to be accessible to bats, like attics or garage doors. Bats tend to occupy these areas and can leave a trail of harmful materials behind them. To get rid of bats effectively, you must first identify all potential bat openings in your home. This includes cracks in windows and other areas where bats can enter or exit.

Next, seal off the entrance points of your home. For bats living inside your home, you must install one-way exit valves or doors. These devices are similar to a bat cone. They go on all entry points, allowing bats to exit through the entrance. After installing one-way valves, make sure to leave them in place for at least 3 days. Otherwise, the bats will find their way in again.

Read More:   Best Way to Solve The Problem Of The Drill Sergeant

Copper mesh

Using copper mesh to get rid of bats can be a great way to eliminate this common pest. This type of material is specifically designed for use in bat-proofing, so it will not only protect your home but also prevent other animals from invading. If you want to use this product, here are some helpful tips:

Stuf-Fit Copper Mesh is made of flexible copper that is extremely resistant to rust and corrosion. This material is also heat-resistant, making it difficult for rodents to chew through it. Moreover, it can be cut with ordinary household scissors or tin snips. You can then use foam sealant or copper mesh to fill the void. This is a simple, inexpensive solution to a common bat problem.

Bats are sensitive creatures. Adding sounds, lights and odors can help drive them out. Creating an intolerable living space will also help to repel them. The last thing you want is to kill them while they’re still inside your home! Luckily, using copper mesh to get rid of bats can be an easy home improvement project! A great way to keep bats out is by enclosing the attic with bat mesh. This will keep the bats out and protect your home from future invasions.

Mint spray

There are several methods to get rid of bats. First, you can leave cups of water and peppermint around the area where bats live. Make sure to replace the cups daily. This is an effective method as bats are creatures of habit and will likely try to return to a familiar area. Another way to get rid of bats is to spray the area with peppermint oil. This is usually a safe solution but you should always consult a professional to be sure it’s safe for your family and pets.

If you can’t get rid of bats with a traditional method, you can try peppermint spray. This repellent is made from peppermint oil, which bats find offensive. To create a homemade spray, mix one capful of peppermint oil into three cups of water. Divide the mixture between three plastic cups and distribute it around the area where bats hang out. You can also spray it on walls and perches, and around the entrance/exit of your home.

A combination of techniques is also effective for bats, especially when the problem is confined to the home or porch. Once the bats are out, they’ll likely leave and find a new roost elsewhere. Moreover, using a spray that contains peppermint will attract bat moths, which eats bats. Just remember that peppermint oil is irritating to humans, so if you accidentally spray it on yourself, flush it away or call a health care provider immediately.

Using a bat cone

Using a bat cone is an effective method of removing bats in a home. Bats can enter a dwelling through a quarter-inch opening, so you should place the cone close to the entrance of these areas. Bat droppings and urine can contaminate items underneath the roosting area. Once the bats are removed, you must sweep up the guano and clean up any urine.

To use a bat cone, install a hole in the wall or floor at the entrance to the roost. The cone should be at least 6 inches wide. You can attach it to the wall or window using pushpins, staples, or duct-tape. Before attaching the cone, remove any entry points, such as torn window screens or holes. Bats like to enter and exit through a downward angle.

Read More:   How to Build Deck Stairs

If the bat is already inside the house, you can trap it with a 1-quart plastic container. If the bat is able to fly out, use the tipping can to release it. You can also trap the bat with a 1-quart plastic container. Afterwards, release it outside. If you have more than one bat in a house, you can use a trap made of a 1-quart plastic container.

Handling a bat with bare hands

Bats can be dangerous, and if you’ve ever handled one, you’ll know why. Despite the fact that they’re rarely aggressive, bats can bite out of self-defense. Never attempt to handle a bat without gloves or leather gloves. While bats are rarely infected with rabies, they can bite if they’re frightened or in danger. If you think you’ve found a bat in your home, call animal control right away to get it out safely.

Handling a bat with bare hands is not advisable, because bats may bite. First of all, it’s almost impossible to catch a bat while it’s flying. Also, if you do try to catch a bat while it’s flying, it’s likely that you’ll get injured. Moreover, bats may try to bite you, so you’ll have to wait until it’s completely motionless before handling it.

If a bat bites you, make sure you wash your hands thoroughly with soap and water to prevent any possible contamination. Also, be sure to get it tested for rabies. In some cases, bats can carry infectious materials, such as brain material and saliva. Moreover, if you get bitten, take it to a veterinarian right away. Also, be sure to use mosquito netting or screen if you sleep outside, so that you can get rid of bats in a safe way.

Using a bat excluder

If you’ve got a problem with bats in your home, one of the best ways to get rid of them is to cover the entryway hole with a bat excluder. These devices make it impossible for bats to return through the holes. Unlike bird netting, bats cannot squeeze through them, so installing one of these devices is a good way to ensure that you get rid of bats for good.

A one-way bat excluder fits on all entry points and keeps them out. These devices are also called bat check valves. They fit over the entrance points of your home and only let bats leave. When used correctly, you can leave them in place for several weeks and then caulk around them when they’re no longer present. Bats can fly through holes as small as a half-inch, so it’s important to install a one-way bat excluder at all entry points in your home.

In addition to the bat excluder, you can also get rid of bats by installing a door that keeps them out. Bats can make their way into the attic and can cause a lot of damage. This type of exclusion is the best way to get rid of bats in a home without causing much damage to the bats’ habitat. Using a bat excluder will make the situation easier for you and save you money in the long run.

Why trust Handyman.Guide?

s written by Itamar Ben-Dor, who has 25 years of experience in renovations, carpentry, locks, creation, landscaping, painting, furniture construction, and furniture renovation, works with concrete, plumbing, door repair, and more.

Itamar Ben-Dor has been in the home improvement business for over 25 years. Itamar Ben-Dor is a jack of all trades. He's worked in the renovation field for years, doing everything from locksmithing to carpentry. He's a small repairs specialist. But his true passion lies in furniture construction and renovation - he loves seeing old pieces come back to life with some new woodwork or a fresh coat of paint.

He has taken courses on many topics in these fields at professional colleges in Israel. Over the years, Itamar has also become quite skilled in gardening, carpentry, and renovations. He's worked on projects of all sizes, from massive renovations to small repairs. No job is too big or too small for him!

Disclosure: participates in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for publishers to earn fees by linking to and affiliated sites.