How to Fix a Cabinet Door That Won’t Close

We research in-depth and provide unbiased reviews and recommendations on the best products. We strive to give you the most accurate information. If you buy something through our links, we may earn a commission.

A misaligned cabinet door may not close properly. To fix this problem, follow the steps outlined in this article. Before you try any of these solutions, make sure to carefully examine the hinges of your cabinet doors. In some cases, a loose hinge could be the source of your problem. If you are unable to fix this problem, you can try adjusting the hinges. Also, you may need to adjust the cabinet’s level in order to get the door to close properly.

Adjustable hinges

If a cabinet door won’t close, it may be due to the hinges being out of alignment. If the door is out of alignment, you may not be able to adjust the hinges correctly. The first step to fixing a door that won’t close is to open the cabinet and test it. If it does close, the problem is most likely in the hinges. Turn the screws clockwise one quarter turn at a time, until the door closes correctly.

Check the baseplate screws. There are two screws that attach to the hinge assembly ‘bar’. The screws in each hinge control how far the door closes. Loosening the screws will move the door away from the side where it closes, and tightening them will move the cabinet closer to the shutting edge. This process is similar to how you would repair a door that won’t close properly, but will not cause any damage to the cabinet.

The first step to fix a cabinet door that won’t close is to check the alignment of the cabinet doors. Many times, these doors will not close correctly due to gaps or misalignment. The next step is to adjust the hinges, which will improve the door’s alignment. The screws in the adjustable hinges impact the operation of the door. The left screw controls the horizontal adjustment while the right screw controls the height and side adjustments.

Re-leveling a cabinet

First, inspect the cabinet door. Is it level with the edge of the cabinet? If not, re-level the door using the screws on the hinge plate. Turn the screws clockwise or counterclockwise to adjust the door’s height. To adjust the depth of the door, turn the screw closest to the cabinet. To level a cabinet door that won’t close, follow the same procedure as you did for adjusting the door’s height.

After you’ve determined the proper height, you can replace the hinges. Replaced hinges will require new screws. You can use epoxy wood filler to match the color of the hinges. You’ll also need to replace the hinges if the door is separating in the middle. Finally, check the hinges. They should be replaced if they’ve become loose or have come loose.

To re-level a cabinet door that won’t close, loosen the screws on the hinge mounting plates. Most hinges have three screws on their mounting plates. Loosen the screws and readjust the hinge. Make sure the cabinet door is level, as it will be difficult to close if it’s not level. You can also adjust the screws on the cabinet box itself.

If your cabinet doors are not aligned properly, you’ll need to adjust the hinges. Even if the hinges aren’t completely aligned, they should at least be aligned. Adjusting the hinges is the easiest way to fix an uneven cabinet door. In some cases, hinge screws are loose and can cause the door to sag. If the hinge screws are not loose, you can unscrew them, but be careful not to remove them – they’re not meant for this purpose.

Read More:   How to Start Woodworking As a Hobby?

Re-aligning the door edge

To adjust the hinges of your cabinet doors, you may need to loosen the screws holding them in place and turn them in a clockwise or counterclockwise direction. Then, nudge the door back into alignment. If the door is tilting to one side or the other, start with the bottom hinge and work your way up. It should now close properly.

To adjust the hinges, locate the screws that secure the cabinet doors to the cabinet. Make sure that they are evenly spaced and tight. If they have gotten cocked, you may need to buy longer screws. Also, you may want to install a shim in the gap between the door edge and the cabinet box. If you still can’t get the door to close properly, you can try tightening the screws in the cabinet.

Adjusting the hinges of a cabinet door can be difficult, but the best option is to follow the instructions on the manufacturer’s manual. It is important to be patient while adjusting the hinges. Oftentimes, the hinges can wear out, so you need to be careful not to damage them by over-adjusting the hinges. If you have a helper, ask them to hold the doors until they close.

Abuse of soft-close hinges

Whether the hinges are soft-close or not, using the screws on these types of doors to adjust the door alignment can help you fix the issue. In order to adjust the hinge, you should apply pressure and tension simultaneously. Make sure that you place the screws sideways to the cabinet and not on the top or bottom of the door. If you still cannot close the door, you can try another method of adjustment, such as using a Phillips screwdriver.

Abuse of soft-close hinges to repair a cabinet door that won t close can also lead to a door slamming. While these hinges have a special mechanism that prevents them from slamming shut, you may not install them correctly, causing your cabinet door to overlap or slam. Adding a rubber bumper can help protect the wood when installing the soft-close hinges on your cabinets.

One of the most common reasons soft-close hinges won’t close is due to a loose screw. Soft-close hinges are designed to prevent the door from slamming shut with too much force, causing it to bang or otherwise damage the contents of the cabinet. You should also avoid attempting to force the door to close by tightening the screws on the door.

Stubborn hinges

The cabinet door won’t close properly or may be stuck in a position where it won’t close at all. First, you must determine which hinge is bent and which one isn’t. Then, take a matchbook cover or another piece of cardboard and fold it in half. Place it inside the cabinet, over the hinge, and close it again. This should make the cabinet door close properly. Repeat this process three times, and you’ll be on your way to a closed cabinet door.

A screwdriver is a good tool to use to inspect the door. To do this, hold the door open with one hand. Using a screwdriver, turn the screws clockwise one quarter turn at a time. This will add tension to the internal spring. If the problem persists, you can repeat the process. It may take several attempts, so don’t force the issue too much.

The screws holding the hinge to the cabinet may be stripped, causing the door to sag. To prevent this, you should fill the holes with glue. Use a toothpick dipped in glue and insert it through the hinge. Allow the glue to set for at least 24 hours. Then, try putting the hinge back on. If this doesn’t work, you might need to replace the hinge.

Read More:   How to Stain Wood Different Colors Without Bleeding

Broken soft-close hinges

If you’re dealing with a door that won’t close, the most common culprit is probably a broken soft-close hinge. These hinges prevent cabinet doors from slamming shut, so they’re susceptible to breakage. To fix soft-close hinges, simply tighten loose screws. Once the screws are tight, you can realign the cabinet door and try closing it again.

If one hinge is bad and two others are fine, the door may still wobble. If you’re not confident in your DIY skills, you can always ask a friend to hold the door for you as you install the new hinge. If you’re a beginner, try starting with the top hinge, as it’s less likely to damage the door when you’re first starting out.

Check the adjustment tabs on the soft-close hinges. Usually, there’s a silver or gray plunger in the center of the hinge. Press the tab against the hinge’s adjustment tab and ensure that it’s securely tightened. If this doesn’t work, you’ll need to re-drill the screw holes and re-install the hinge.

The second possibility is that your cabinet door isn’t calibrated properly. To check this, you can turn the hinge 90 degrees clockwise while facing the floor. Test it several times to ensure that it will close smoothly without slamming. Try readjusting the hinge by inserting a matchbook cover or cardboard piece between the door and the cabinet side above the hinge.

Why trust Handyman.Guide?

s written by Itamar Ben-Dor, who has 25 years of experience in renovations, carpentry, locks, creation, landscaping, painting, furniture construction, and furniture renovation, works with concrete, plumbing, door repair, and more.

Itamar Ben-Dor has been in the home improvement business for over 25 years. Itamar Ben-Dor is a jack of all trades. He's worked in the renovation field for years, doing everything from locksmithing to carpentry. He's a small repairs specialist. But his true passion lies in furniture construction and renovation - he loves seeing old pieces come back to life with some new woodwork or a fresh coat of paint.

He has taken courses on many topics in these fields at professional colleges in Israel. Over the years, Itamar has also become quite skilled in gardening, carpentry, and renovations. He's worked on projects of all sizes, from massive renovations to small repairs. No job is too big or too small for him!


Disclosure: handyman.guide participates in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for publishers to earn fees by linking to Amazon.com and affiliated sites.

HandyMan.Guide
Logo