How to Convert a Full Size Bed to a Queen

We research in-depth and provide unbiased reviews and recommendations on the best products. We strive to give you the most accurate information. If you buy something through our links, we may earn a commission.

If you’re thinking of changing your bedroom decor, you may be wondering how to convert a full size bed to a queen. In the past, the only options were twin and full-size beds. Those two sizes differ by six inches in width, leaving a three-inch overhang on each side. The frame of the bed will attach to the headboard and footboard, while some are simply hooks.

Make a wood frame with top and bottom rails

To make a bed frame, you will need some wood that is strong and workable. A good choice is wood with tight grain, no splits, and minimal knots. You will also need to avoid knots in the screw areas because they are hard to drill through. Once you have selected your wood, you will be able to start making the frame. After all, you are not only going to be using this frame for your daughter’s room, but for your own.

To make a wood frame with top and bottom rail, you will need two 1x4s that are about three inches wider than the inner width of the full size bed frame. Mark the lengths with a pencil and cut them accordingly. If you have trouble measuring, you can also take the measurements to a hardware store. If you need to, you can also ask someone at Home Depot to do the cutting for you. Once you have the two pieces cut, place them 2 feet apart.

Start by placing a pair of 2×4 pieces with holes in their center. Place a carriage bolt through both holes and add a washer nut to the other end of the bolt. Then, you can begin building your new bed. Then, have a second person place the headboard in the frame and the mattress on top of the frame. Don’t forget to put a spring sheet on top.

To give your bed a queen size look, upholster the wooden frame. You can also add a headboard to the wooden frame. A crown headboard will make your bed look like a queen. Using foam or batting on the headboard will add more comfort. To make the headboard more comfortable, you can double the foam batting. Once you’ve finished the headboard, you can now move the entire frame to the bedroom.

Attach a giant headboard and footboard

Attaching a giant headboard and footboard to a full size bed is a simple DIY project that can transform any bedroom into a beautiful queen-sized bed. Rather than spending hundreds of dollars on a new headboard, consider upcycling an old one. Instead of purchasing new furniture, you can make your own by weaving three panels of binder cane from poplar boards. For $20, you can buy prewoven caning material from a home-improvement store. For an even bigger effect, install a floating shelf above the headboard to house an extra plant or other decorative items.

Once you’ve sourced a large enough piece of wood, you’ll need to make two identical 1×4 pieces. First, drill holes in both pieces of wood. Make the first hole larger than the other so that the headboard can fit inside it. You’ll need to drill four holes on each piece. Then, cut the two remaining pieces of 1×4 so that they’re even. Next, place the headboard and footboard in their slots. Make sure that they fit properly and that the headboard and footboard are both level.

Read More:   How to Accurately Cut Wood to the Same Length

You can also build a giant headboard and footboard yourself by upholstering a wooden frame. The process is straightforward: you should start by looking for old dresser drawers, cut out the desired shape and size of the headboard, and place the pieces together. If you want to make it more stylish, you can wallpaper or paint the back of the drawers. When you’re finished, you can add a soft fabric sheet to the top and bottom of the headboard to make it look more luxurious.

Another great DIY project is attaching a giant headboard and footboard to a full size bed. This project is a great idea for high ceilings! And you can get the lumber you need from the thrift store at a reasonable price. But remember that drilling holes in wood will weaken its strength. This project is not for the faint of heart. It will require patience and some research.

Drill holes in the bed frame

Before you can start converting a full-size bed to a queen-size one, you must drill holes in the frame. The first step is to get the materials you need. You may need to buy a pocket hole jig to ensure proper placement. Pocket holes are drilled at an angle to hide screws. The middle cross members are placed at 13 1/2 inches and 27 inches on the frame. Screw these parts together.

You may have to drill holes in the footboard and headboard of the existing full-size bed. However, if you bought a new frame, you might already have footboard brackets attached. If you didn’t buy a new bed, you can just add a footboard by using bolt-on extension brackets. The process is simple, but you need to take your time.

Make sure you align the holes in the bed frame so that you can put the new mattress. If you do not have the same measurements as the existing bed, you will need to make a new hole in the frame. You can buy the same-size adjustable bed by buying it online. You can find it for a low price on the Internet. Don’t forget to take pictures of the completed process. It will save you time and money.

If you do not have enough space to fit the new footboard, you may want to remove some of the bedding from the bed. Also, make sure there is space around the bed to slide the footboard into the frame. If you have help with this, you can have someone else hold the footboard against the frame and screw the bolts in place. Once the frame is secure, the other person should place the headboard into the frame and the mattress on top. The mattress should be covered with a spring sheet.

Attach a plush pillow headboard

If you’d like to convert a full size bed to a queen, it’s easy to accomplish. First, you need to break down the oversize headboard into smaller squares. This is easily done by cutting a sheet of plywood into eighteen-inch squares, wrapping the backing in quilt batting, and then sewing it to the panels. Next, cut a piece of fabric that’s two inches wider than the plywood squares. Trim any extra fabric that hangs over the edge to make hanging the headboard easier. Then, hang the panels on the frames using sawtooth picture hangers, which are easy to attach to the headboards.

If you’re looking to spend less than $40 to install a headboard, you can also use a large picture frame. Then, paint it in a color to match your decor. If you’re not up for refinishing the frame, you can even use wallpaper that’s cut to fit the frame. Make sure to follow the manufacturer’s directions on how to apply wallpaper to the backing of the frame before you hang it on the bed.

Read More:   How to Change Nailhead Color

After you’ve attached a plush pillow headboard, you can then attach a queen-size mattress. The resulting queen-sized bed will have six extra inches of width, leaving about three inches of mattress material. It’s simple to do, and it will leave your bed looking stylish. It’s also possible to attach a plush pillow headboard to convert full size bed to queen without spending too much money.

Alternatively, you can also use a wooden free-standing storage headboard. This style of headboard requires no attachment and matches the bed frame’s overall design. Another type of headboard is the wall-mounted headboard. It’s easy to install and doesn’t require any tools, although you may need to purchase additional fasteners and a wrench. Once you’ve attached the headboard to the bed frame, you can use the additional fasteners to secure the headboard to the wall.

Attach a modern metal frame

If you want to convert a full size bed to a queen size, attach a modern metal frame to the existing bed. Attaching a new metal frame will not be difficult, but you should be sure that you follow the instructions carefully. Here’s how. First, remove the mattress. Then, place the new mattress on top of the old one. If the new mattress has no mattress support, you may need to purchase an additional mattress.

You can also attach a metal frame to the headboard and footboard of a double bed. You can do this by removing the side rails and cross slats. After that, you can purchase a converter kit. A converter kit resembles a modern metal bed frame. The main component of the conversion kit is an L-shaped steel rail system that supports the mattress without cross slats. The frame includes hardware for attaching to a headboard or footboard.

You can attach a modern metal frame to a full size bed. The metal frame has brackets at the foot and headboard that line up with screw holes. You can then attach a headboard to the bed using the screws. You should follow the instructions on the brackets and headboard before installing them. If you don’t want to install them yourself, you can consult the instructions provided by the manufacturer.

Metal bed frames are both durable and affordable. Smart base bed frames can also be used to eliminate a box spring. You can also choose a frame that includes storage drawers, maximizing the space in a small room. Underbed storage is also a good option, keeping seasonal items out of sight. Another option is an adjustable bed frame. This motorized frame can raise or lower the mattress head or foot. Adjustable bed frames last as long as the mattress.

Why trust Handyman.Guide?

s written by Itamar Ben-Dor, who has 25 years of experience in renovations, carpentry, locks, creation, landscaping, painting, furniture construction, and furniture renovation, works with concrete, plumbing, door repair, and more.

Itamar Ben-Dor has been in the home improvement business for over 25 years. Itamar Ben-Dor is a jack of all trades. He's worked in the renovation field for years, doing everything from locksmithing to carpentry. He's a small repairs specialist. But his true passion lies in furniture construction and renovation - he loves seeing old pieces come back to life with some new woodwork or a fresh coat of paint.

He has taken courses on many topics in these fields at professional colleges in Israel. Over the years, Itamar has also become quite skilled in gardening, carpentry, and renovations. He's worked on projects of all sizes, from massive renovations to small repairs. No job is too big or too small for him!

Disclosure: participates in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for publishers to earn fees by linking to and affiliated sites.