We research in-depth and provide unbiased reviews and recommendations on the best products. We strive to give you the most accurate information. If you buy something through our links, we may earn a commission.
The first step in building an upholstered chair is to build the frame. To do this, you will need a piece of plywood and a jigsaw. Cut the plywood to size, making sure that each piece has a 3/4” notch on one end. Then, use countersunk 1-1/2” screws to attach it to the chair frame. You will also need a 2×4 piece of plywood cut at a 10 degree angle. This will be the seat frame when the back is upholstered.
Staple the fabric at the sides into the frame of the furniture
Lay out the fabric on the seat and make sure that the stripes and patterns align. Use the fabric staple gun to attach the fabric to the seat and frame. Make sure to staple from the underside and not bunch in sections. Repeat for the other side of the seat. The arms and the back should be the last part to be stapled. After the seat is covered with the fabric, you can proceed with the arms.
The fabric at the side can sometimes become sagging and wrinkled. To fix this, staple the fabric in the frame of the furniture. To ensure that the fabric doesn’t come out loose, make sure that the staples are evenly spaced. Also, use a tack remover to remove any staples that are bent or uneven. Professional upholstery specialists know how to staple the fabric around the frame of the furniture.
The fabric can be tricky to cut. It’s better to cut a small piece and work it out with a snippet. You can also use a needle-nose pliers to remove the staples. You’ll need an upholstery staple remover, which is a relatively inexpensive tool. A staple remover makes the process easier and faster. If you’re unsure of how to remove the staples, try a flathead screwdriver.
After you have stapled the fabric at the sides, you can now work on the arms. The arms are usually the trickiest part. It can be tricky to staple the fabric on the arms, but you can always readjust the staples as needed. Once the arms are finished, you can add the tack strips on the top of the back. You can also try tack strips if you have extra fabric.
Staple the fabric at the front edge into the frame of the furniture
The fabric on the seat is stapled into the frame just like an artist’s canvas. Stretch the fabric from the front edge to the back edge. Next, staple the fabric in the middle of the side edges with a few staples. Be sure to stretch the fabric tightly, so that there is equal tension on all sides. Once the fabric is secure, you should cover it with a black polyester cloth.
To attach the fabric to the frame, begin at the front edge of the upholstery fabric and work your way towards the corners. Be sure to pull the fabric tightly for each staple. This is especially important if the fabric has design elements. Then, tuck the batting inside the fabric to hide the underlying staples. Once the entire seat is covered, repeat the process with the remaining fabric.
After removing the piping, you can now attach the fabric to the frame. Use a flathead screwdriver to remove the staples. You can use needle-nose pliers to do this, but it is best to use a staple remover to make the process faster and more effective. You can purchase a staple remover for about $50. You’ll find it useful when your upholstery project is over.
Once the back piece is done, staple the fabric on the top. Repeat this process for the front piece. When you’ve finished, you can move on to the arms. These are the trickiest part, but with a little practice, you’ll have a nice new couch to enjoy. If you’re not sure where to place the staples, use a piece of cardboard on the front edge and the back.
Staple the fabric at the back edge into the frame of the furniture
Before stapling the fabric, you need to make sure it’s even. Staples that are not even will create misaligned cuts. Using needle-nose pliers to pry out staples is not a difficult process, but it will make your job easier. To get the best results, use an upholstery staple remover. This device is not expensive and makes the process much faster.
Once the frame is ready, you can begin attaching the new fabric. First, you need to cut a strip of cardboard about 1/2″ wide and the length of the couch’s backrest. You can use this to secure the fabric at the back edge. The fabric should be stapled to the front edge and the back frame of the couch. Repeat the process for the other side of the couch.
Staple the fabric at the back edge of the furniture. When the fabric is finished, flip the seat over to check its pattern. You’ll need to staple it every two inches along the back edge of the furniture. After you have finished installing the fabric on the seat, flip the seat over and check that the staples are aligned with the rest of the fabric. After staple the fabric, you can trim it with sheers or sewn welting. Alternatively, you can use nail tacks.
When you’re finished, you should attach trim to hide the staple line. A hammered stud style trim is a good choice for this purpose. These pieces come in a long roll and have studs that are hammered down at points. These pieces cut easily and are a great choice for upholstery projects. A hand staple gun can do the job. You can also use a pneumatic staple gun.
Before you begin reupholstering the furniture, you need to sand the wood frame. This will ensure that the upholstered furniture is in good condition. You should also prepare the seat to prevent damage to the wood frame. A hickory workbench is an excellent option to give your room a new look. Tarah from Grandmas House DIY has been updating her grandmother’s farmhouse for years. She recently completed an updated workbench. Similarly, Niky from The House on Silverados shows us how she updated her barstools.
Staple the upholstery fabric at the front edge into the frame of the furniture
Begin by stapling the upholstery fabric at the front edge into the furniture frame. Staple the upholstery fabric at the front edge, working your way toward the corners. When staple-driving the fabric, be sure to pull it taut before you staple. Loose fabric will cause the finished upholstery job to look sloppy. Once the fabric has been stapled into place, you can begin to cover the staples with trim.
Alternatively, you can purchase upholstery-weight fabric and sew it on. This type of fabric will withstand high wear levels, while less durable fabrics can be backed by canvas or muslin. You can also add batting, which is a thin layer of cotton wadding that creates a fluffy puff under the fabric. If you’re not a professional at furniture upholstery, you can use a hand staple gun. Pneumatic staple guns may be more expensive, but they’re not necessary.
If the upholstery fabric is exposed to the frame, it is necessary to apply an edge treatment to conceal the raw cut edge of the fabric. Edge treatments not only hide the stapled edge, but also help reinforce the stapled edge to prevent pulling and fraying. Some edge treatments include welting, nails, or gimp. In addition to stapling the upholstery fabric at the front edge into the frame of the furniture, you may choose to use a welting or nailing technique.
You can use temporary staples to secure the back of the upholstery fabric. You can also use a cardboard strip as a guide, which will make the fabric look neat. Once the pattern has been properly applied, you can use a staple gun to secure the fabric. This process requires patience and attention. Make sure the fabric is centered and aligned. If it is not, then you can use an upholstery tack strip.
Before you begin stapled upholstery, you should first understand what the fabric is. Linter felt is a thick material that is commonly used in bedding and upholstery. It is made from the short cotton fibres of the cotton ball and is often called cotton felt. It is most often used as the last layer under the top fabric. It is very thick and provides extra resistance. The back of the upholstery fabric will need to be reinforced with the next layer underneath.