We research in-depth and provide unbiased reviews and recommendations on the best products. We strive to give you the most accurate information. If you buy something through our links, we may earn a commission.
To learn how to apply Waterlox to your wood furniture, read this article. This penetrating sealer enhances the color, grain, and richness of wood and provides superior protection against use and common household spills. Waterlox is a nontoxic, environmentally friendly sealer. Apply it to your furniture pieces by following the instructions on the label. Before applying Waterlox to wooden furniture, sand the surface to remove scratches.
Waterlox is a penetrating sealer
For penetrating finish, Waterlox is the answer. Unlike oil-based finishes, water-based sealers have no drying time and will protect the wood substrate while still penetrating the pores. Linseed oil is a drying oil, so it has limited penetrating power, and will require frequent re-applications. The oil can also turn yellow over time due to linoleic acid. Waterlox provides better penetration and adhesion to soft and exotic woods.
Before using Waterlox, you should always perform proper testing on a scrap piece of the surface. Make sure to apply the product in an area with minimal moisture to ensure that the finish will adhere well to the wood. Also, sanding should be completed with a 100-150 grit sander for maximum penetration. Waterlox will highlight mistakes in sanding. It is recommended that you wear a dust mask when performing this process.
Waterlox Original Marine Sealer is a traditional formulation for waterproofing exterior wood. Its Tung oil formula has a low odor and is eco-friendly. It is easy to apply and has a rich finish. Both Waterlox Original Marine Sealer and Waterlox Original Sealer/Finish can be used interchangeably. If you’re looking for an effective penetrating finish, Waterlox Original Marine Sealer and Waterlox Original High Gloss Finish are great options.
European oil/wax-based systems are the most common type of clear finish. Its penetration qualities allow it to saturate the wood deeply, protecting it from moisture damage. It dries to a tough, water-resistant finish that can withstand the pressures of foot traffic and common household spills. These finishes also last longer and require less frequent reapplication. The Waterlox Original Sealer is available in quart and gallon sizes.
It enhances the color, richness, and grain of wood
Waterlox ORIGINAL Sealer/Finish has been around for over 100 years, and its original formulation has not changed much in that time. Made in Cleveland, Ohio, it is a resin-modified tung oil finish. It provides a warm, amber color and gives wood an incredibly rich appearance. It is also a durable finish that is perfect for many projects, including flooring, turned bowls, and furniture.
While it is not a water-based finish, Waterlox offers superior direct adhesion to tropical hardwood and can be used as a seal coat under other finishes. The penetrating nature of Waterlox eliminates the problems associated with other products such as poor adhesion, film-building, short-life, and drying. Waterlox is a premium choice for many woodworking projects, and is compatible with most wood types.
Waterlox ORIGINAL Sealer/Finish has constant product number 5284. It is marketed under many names, and it is also available in various private label forms. The difference between the two products is the application process. When applying Waterlox ORIGINAL, make sure to wear a respirator. Waterlox ORIGINAL Sealer/Finish requires the use of a NIOSH/MSHA-approved respirator.
The Waterlox Original Tung Oil Finish does not require sanding in between coats. The tung oil stain bonds to the previous coat and becomes part of it. To apply Waterlox ORIGINAL Sealer/Finish, use a lamb’s wool applicator. Use light pressure and apply the stain on a slightly angled surface. Afterward, allow the stain to dry for at least 24 hours.
The Waterlox finish is compatible with oily wood and dries harder than polyurethane. Unlike polyurethane, Waterlox does not leave an amber layer and scratches are less visible. Waterlox also looks different than polyurethane, as the color and grain of the wood are enhanced. You can’t tell which is more expensive: Waterlox or a polyurethane finish?
It provides superior protection against use and common household spills
Waterlox Original Sealer/Finish is a water-resistant finish for wood furniture, cabinetry, and countertops. This non-toxic, durable finish won’t smear or stain like pure linseed oil does. Plus, Waterlox is non-toxic when dry. This water-resistant finish is ideal for porous interior surfaces because it doesn’t cause chalking or dusting.
Waterlox Original Tung Oil finishes are compatible with mineral or vegetable oils and can be applied over either of them with adequate ventilation. Then, wipe off the excess with mineral or paint thinner. Unlike other finishes, Waterlox Original Tung Oil finishes don’t change color with age or fading. Waterlox Original Tung Oil Finish is an amber-colored finish that prevents stains and provides excellent protection against common household spills.
Waterlox Original Sealer/Finish can be used as a sealer coat underneath most finishes and provides excellent adhesion and color enhancement. Waterlox products are made by the Hawkins family since 1910. They are the PaintSource Product of Choice for elegant wood care. You’ll see why it’s a PaintSource Product of Choice. For a lifetime of protection, choose Waterlox.
The Original Tung Oil finish is a natural-looking product that is based on tung oil. It brings out the natural patina of wood. It’s also a great choice for wood projects exposed to moisture and wear. It’s not a stain, but it adds color to the grain and protects the wood from moisture and wear. It’s an alternative to staining, but it doesn’t provide the same thick coating.
It is non-toxic
A non-toxic sealer, Waterlox is a great choice for wood floors. It won’t harm the finish of most wood floors and won’t ruin the gloss or film of most wood finishes. It will also neutralize harsh cleaner residues while enhancing the beauty of wood surfaces when dry. Waterlox will dissolve hard water and ice melt films, leaving no soap haze behind. Available in a quart size, Waterlox is environmentally friendly.
It has an emulsion-based formula that penetrates deep into the wood and locks in the water to provide a rich finish. It’s non-toxic when cured, and there’s no need for wax or cross-linker. The non-toxic formula is environmentally safe for all types of flooring. Waterlox also is easy to work with, making it a great choice for floors. When applied to bare wood, the product will dry clear.
Waterlox Original Tung Oil Finish is a non-toxic wood finish that penetrates much better than linseed oil or other oils. It seals wood fibers beneath the surface and forms a protective film. When applied and dried properly, Waterlox is resistant to hot liquids and alcohol. The coating is also chemically resistant, meaning it won’t stain or peel. When applied correctly, Waterlox prevents water spots, which makes it ideal for a home.
It is applied with a foam brush
When applying Waterlox, you can use a foam brush or lambs wool applicator to cover the surface evenly. While Waterlox recommends a bristle brush, it is also acceptable to use a disposable sponge or paint pad. Then, once the first coat has dried, you can repeat the process by applying a second coat of Waterlox. It is not necessary to sand between coats to ensure good adhesion. Depending on the wood surface, you may want to apply additional coats.
The application process is straightforward: you apply Waterlox to the surface of the wood using the foam brush. First, dip the foam brush about 1/3 of the way into the liquid. Next, run the tip of the brush over the edge of a glass container. This will help prevent drips. Once the surface has been thoroughly saturated, you can repeat the process several times. To speed up the drying process, you can allow the surface to air dry for a few days before applying another coat.
After the first coat has dried, it is important to allow the surface to dry for about 20 minutes. After that, you can lightly sand the area to remove any imperfections or surface defects. You can then apply another coat of Waterlox. After a day or two, you can reapply the finish with a foam brush. It does not need to be completely dry before you can sand it.
Waterlox is a finisher and comes in three finishes: the Original Sealer/Finish, the Satin Finish, and the Original High Gloss Finish. The finish of your choice can be glossy or matte, and each one has its own benefits. Regardless of the finish you choose, you should prepare the wood surface by sanding it or cleaning away debris and dust. Apply Waterlox with the grain. Waterlox Original Sealer should be the basecoat for every stain job, and you can add additional coats until you achieve the desired sheen.