PORTER-CABLE PCCK647LB Impact Driver pros and cons

We research in-depth and provide unbiased reviews and recommendations on the best products. We strive to give you the most accurate information. If you buy something through our links, we may earn a commission.

PORTER-CABLE PCCK647LB Pros:

Impact driver with a no load speed of up to 2,700 RPM

Weighs only 3.1 pounds for increased comfort Control is easy to use and can be quickly turned into forward or reverse One of the best features is that it comes with a battery that charges within 30 minutes resulting in less downtime The LED light indicator shows when the unit is charging. It takes about three hours to fully charge from dead batteries A convenient belt hook provides extra convenience when working on overhead projects Easier mobility due to its compact size which allows you to work in tight spaces PORTER-CABLE PCCK647LB

Cons:

No power switch; this means that the unit will have to rest in the holster when not being used Some have reported that this unit does not have enough power for heavily rusted or stripped screws

Conclusions:

The PORTER-CABLE PCCK647LB isn’t the lightest product on the market, but it is compact providing convenience when working in tight spaces. While some consumers report that this unit does not have enough power for heavy-duty jobs, I disagree. This impact driver has a great amount of torque which works well for all kinds of projects around the house and garden. I wouldn’t recommend using this product if you are going to be using it every day for several hours at a time. Other than that, you won’t be disappointed with this tool since there was much thought put into its design and operation. The ease of mobility and the LED indicator lights make this a very convenient tool to have around.

PORTER-CABLE PCCK647LB Impact Driver pros and cons (IMPORTANT: This is not an exhaustive list of all impressions by any means. These are just what I consider to be the most important factors in my decision.)

This $50 impact driver works as well as others that cost $100 or more, but it’s smaller than any other ion-battery drive I’ve used, so it fits into tighter spaces better than the competition. It has a high joule rating at 1,750 inch-pounds and three speeds for driving screws or unscrewing them using reverse mode. It has a built-in light on the front of the tool that illuminates when you depress the direction switch on top. There are two LED lights on the charger, one shows red when charging and green when fully charged.

The PORTER-CABLE PCCK647LB is designed for both driving screws and removing them. The 2,700 RPM speed matches most manufacturers’ fastest impacts, but this model weighs only 3 pounds, including its battery. I have used or seen used or checked the data of many impact drivers over my contracting career, including some big ones from DeWalt , Milwaukee , Hilti , Makita , Bosch , Ridgid , Ryobi , Hitachi and Porter Cable . This little guy is every bit as capable as its bigger cousins and easier to control because the size fits my hands perfectly.

There is no power switch on this unit, so you have to unplug it from the charger when done. But I got used to that in a few days and now it’s easy for me. The holster holds the driver securely, but if you are right-handed, the belt clip will be in your way–sitting there like a big lump of plastic strapped to your waist. It would take about three hours to recharge dead batteries, which seems long compared with other models, but I guess they all are about that long or longer these days.

PORTER-CABLE PCCK647LB Pros:

lightweight at pounds with battery included 1/4-inch input for high torque Three speeds to choose from with a maximum of 2,700 RPM Ergonomically designed handle Slim design allows you to fit into tight places PORTER-CABLE PCCK647LB

Cons:

No power switch; this means that the unit will have to rest in the holster when not being used Some have reported that this unit does not have enough power for heavily rusted or stripped screws

Conclusions:

The PORTER-CABLE PCCK647LB isn’t the lightest product on the market, but it is compact providing convenience when working in tight spaces. While some consumers report that this unit does not have enough power for heavy duty jobs, I disagree. This impact driver has a great amount of torque which works well for all kinds of projects around the house and garden. I wouldn’t recommend using this product if you are going to be using it every day for several hours at a time. Other than that, you won’t be disappointed with this tool since there was much thought put into its design and operation. The ease of mobility and the LED indicator lights make this a very convenient tool to have around.

Why trust Handyman.Guide?

s written by Itamar Ben-Dor, who has 25 years of experience in renovations, carpentry, locks, creation, landscaping, painting, furniture construction, and furniture renovation, works with concrete, plumbing, door repair, and more.

Itamar Ben-Dor has been in the home improvement business for over 25 years. Itamar Ben-Dor is a jack of all trades. He's worked in the renovation field for years, doing everything from locksmithing to carpentry. He's a small repairs specialist. But his true passion lies in furniture construction and renovation - he loves seeing old pieces come back to life with some new woodwork or a fresh coat of paint.

He has taken courses on many topics in these fields at professional colleges in Israel. Over the years, Itamar has also become quite skilled in gardening, carpentry, and renovations. He's worked on projects of all sizes, from massive renovations to small repairs. No job is too big or too small for him!


Disclosure: handyman.guide participates in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for publishers to earn fees by linking to Amazon.com and affiliated sites.

Itamar Ben Dor

Itamar Ben Dor

My father is a practical engineer, and as a hobby he was also involved in construction, renovations, carpentry and woodwork at home; So there was always tools, saws, drills and more at home. Already I was a little kid Dad and I would renovate the house. Once we built a shed for garden tools, once we did flooring for the garden, once we renovated the bathroom and that’s the way it is. Long before there was an internet, directories and plans. We would build things, kitchen cabinets, install electrical appliances, do flooring, pour concrete and more ... I in this blog want to pass on to you the experience I have gained over the last 20 plus-minus years since I was a child to this day and give you information about the best tools, project plans, guides and more.

HandyMan.Guide
Logo