How to Change Blade on a Dewalt Miter Saw

how to change blade on dewalt miter saw

How to Change Blade on a Dewalt Miter Saw

If you’ve never used a Dewalt miter saw before, you might be wondering how to change the blade. This article will show you how. First, remove the shroud. Doing so will give you access to the blade screws. You need to unscrew them starting with the ones that support the blade. Most modern units have a metal index that runs parallel to the disc. This is where you will hold the index as you unscrew the main bolt.

Once you’ve located the blade, make sure you remove the guard so you can easily access the teeth. Secondly, lower the blade guard. You’ll see washers and oil on the back of the blade. You should turn the saw over so the teeth face the back side of the saw. Then, you’ll want to tighten the blade lock bolt. After that, you’ll need to replace the guard.

When you’ve installed the new blade, you’ll need to install the blade adapter, which is an optional part. Some models don’t come with this tool. If your saw does not have an adapter, you’ll need to purchase one separately. Once you’ve found one, simply place it on the inner clamp washer and screw it onto the saw. Next, you’ll need to tighten the blade screw anticlockwise.

After loosening the blade, you’ll need to remove the protective shroud and remove the screws. Then, you’ll want to take out the protective shroud. If you miss this step, you might be causing yourself problems down the road. Also, be patient as this step is crucial. If you’re unsure, you may need to seek help from a professional.

Many beginners make a common mistake when changing the blade on a Dewalt miter saw. They’re afraid that it’s a difficult process and they may end up hurting themselves in the process. This is not illegal, but it is very expensive. In addition, it’s not a good idea to be impatient. Aim to follow the user manual and make sure you’re patient while changing the blade.

After taking out the blade, you’ll need to unlock the spindle. Once this is unlocked, use the appropriate wrench to remove it from the spindle. This can be a challenging task, so give yourself plenty of time. While you’re working, don’t forget to follow the instructions on how to change the blade. Just follow these simple tips to keep your saw working properly.

The next step is to unscrew the shroud. Most models have one or two screws holding the shroud in place. However, some models have several points of interest. If this is the case, the shroud can be removed easily. Once the shield is removed, you’ll have easy access to the blade screws. It’s important to note that these screws are not in any order, so make sure you start with the supporting screws and work your way down to the blade itself.

The next step is to unplug the miter saw. The blade may be plugged in, but you don’t want the saw to start while you’re changing the blade. You should also unplug the saw before starting the process, and remove the protective shroud if it is attached to the fence. When you’re done, remove the protective shroud and carefully place the blade.

Then, take the protective shroud off. If the blade is attached to the saw with screws, you’ll need to unscrew the screws with a wrench. Then, remove the protective shroud by unscrewing it. Then, follow the instructions carefully to make sure the blade is secure and that the blade is not falling out. This step is important to prevent the blade from slipping, so be patient while you’re changing it.

Afterwards, remove the blade guard. Make sure the teeth of the blade are facing downward. To do this, pull the blade guard up by unscrewing the screw. Then, remove the flange and replace the blade. The flange should be in the same position. Once you’ve removed the guard, you can now change the actual blade. And it’s just as easy as it sounds!

Why trust Handyman.Guide?

s written by Itamar Ben-Dor, who has 25 years of experience in renovations, carpentry, locks, creation, landscaping, painting, furniture construction, and furniture renovation, works with concrete, plumbing, door repair, and more.

This article was written by Itamar Ben-Dor, who has 25 years of experience in renovations, carpentry, locks, creation, landscaping, painting, furniture construction, and furniture renovation, works with concrete, plumbing, door repair, and more.


Disclosure: handyman.guide participates in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for publishers to earn fees by linking to Amazon.com and affiliated sites.

HandyMan.Guide
Logo